Tensile behaviors of Ti3C2Tx(MXene) films

As the most representative member of a new emerging family of 2D material, titanium carbides or nitrides (MXenes), Ti(3)C(2)T(x)and its 2D assembly format, Ti(3)C(2)T(x)film, have displayed outstanding performance in a broad range of practical applications. However the mechanical behaviors of Ti(3)C(2)T(x)films are rarely reported. We report a systematic study of the tensile behavior of Ti(3)C(2)T(x)films. Ti(3)C(2)T(x)films with various thicknesses (2-17 mu m) were prepared by the vacuum filtration method. Quasi-static tension and cyclic tension tests were performed to investigate the deformation and fracture mechanism of Ti(3)C(2)T(x)films. It was found that: (1) the relative sliding between Ti(3)C(2)T(x)flakes is the dominant deformation mechanism of Ti(3)C(2)T(x)films. Cyclic loading-releasing in tension suppresses the inter-layer sliding of Ti(3)C(2)T(x)flakes effectively and thus the tensile strength of thicker Ti(3)C(2)T(x)film (5 mu m) film improves from 57 MPa to 67 MPa. (2) The mechanical properties of Ti(3)C(2)T(x)films are found to be thickness dependent. When the film thickness increases from 2.3 to 17 mu m, the tensile strength and elastic modulus drop from 61 to 36 MPa and from 17 to 8 GPa, respectively. This is interpreted as more structural defects presented in the through-the-thickness direction as film thickness is increased. (3) Moderate ultrasonication pretreatment (30 min) reduces the Ti(3)C(2)T(x)flake size significantly while improving the compactness of the Ti(3)C(2)T(x)film; and the resulting Ti(3)C(2)T(x)film shows a linear stress-strain relationship without plastic-like deformation. As a result, the tensile strength of 5 mu m thick Ti(3)C(2)T(x)film is enhanced to 85 MPa; (4) Structural defects of the Ti(3)C(2)T(x)film have significant effects on both the brittle-like fracture behavior and the distribution of tensile strength.