Synthesis of the Nowotny phase Mo4.8Si3C0.6 from Mo5Si3 + carbon mixtures

被引：6

作者：

Gnesin, B. A. ^{[1
]}

Gnesin, I. B. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Solid State Phys, Chernogolovka 142432, Moscow Oblast, Russia

来源：

INORGANIC MATERIALS | 2015年 / 51卷 / 10期

基金：

俄罗斯基础研究基金会;

关键词：

MECHANICAL-PROPERTIES; MO-LESS-THAN-OR-EQUAL-TO-5SI3C-LESS-THAN-OR-EQUAL-TO-1;

D O I：

10.1134/S0020168515090071

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A simple, efficient method for the synthesis of the Nowotny phase Mo4.8Si3C0.6 from mixtures of the Mo5Si3 silicide and carbon in the form of carbon black or diamond powder has been proposed. The synthesis of the Nowotny phase via reaction sintering has been shown to be more complete in samples prepared at reduced compaction pressures, which has been tentatively attributed to the considerable role of carbon transport through the gas phase. In samples quenched from the liquid state in a levitation melting system, the highest volume fraction of Mo4.8Si3C0.6 has been obtained using starting mixtures of Mo5Si3 and diamond powder.

引用

页码：991 / 998

页数：8

共 50 条

[31] Achieving ultra-high hardness of Ti-3Si-1.5Fe-1Mo alloy via tailoring the in-situ Ti5Si3 [J].

Yuan, Jingjiu ;

Fan, Qunbo ;

Xu, Shun ;

Zhang, Hongmei ;

Yang, Lin ;

Cheng, Xingwang ;

Wang, Duoduo ;

Chen, Kai ;

Zhou, Yu ;

Cai, Cheng ;

Zhou, Siyuan .

VACUUM, 2023, 207

[32] Microstructure and properties of MoSi2-MoB and MoSi2-Mo5Si3 molybdenum silicides [J].

Schneibel, JH ;

Sekhar, JA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 340 (1-2) :204-211

[33] Effects of Si and Oxide Additives on Phase Evolution, Microstructure and Mechanical Properties of Si3N4-Mo Cermet Fabricated by Conventional Powder Metallurgy [J].

Mishra, Sushree Sefali ;

Karak, Swapan Kumar ;

Chaira, Debasis .

METALS AND MATERIALS INTERNATIONAL, 2021, 27 (11) :4601-4617

[34] Effects of Si and Oxide Additives on Phase Evolution, Microstructure and Mechanical Properties of Si3N4–Mo Cermet Fabricated by Conventional Powder Metallurgy [J].

Sushree Sefali Mishra ;

Swapan Kumar Karak ;

Debasis Chaira .

Metals and Materials International, 2021, 27 :4601-4617

[35] Formation of (Nb, X)ss/(3-(Nb, X)5Si3 eutectic and its effect on mechanical properties of Nb-Si-Ti alloys by addition of Mo [J].

Xu, Qin ;

Ma, Xiaohang ;

Wang, Qi ;

Cai, Yanhui ;

Chen, Ruirun .

MATERIALS TODAY COMMUNICATIONS, 2025, 42

[36] Microstructures and room temperature fracture toughness of Nb/Nb5Si3 composites alloyed with W, Mo and W-Mo fabricated by spark plasma sintering [J].

Xiong, Bowen ;

Cai, Changchun ;

Wang, Zhenjun .

JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 604 :211-216

[37] Microstructure and mechanical properties of a MoSi2-Mo5Si3 eutectic composite processed by laser surface melting [J].

Farje, Juan A. Vega ;

Matsunoshita, Hirotaka ;

Kishida, Kyosuke ;

Inui, Haruyuki .

MATERIALS CHARACTERIZATION, 2019, 148 (162-170) :162-170

[38] Microstructural evolution and mechanical properties of Ti-5Al-3Mo-3Cr-1Zr-0.15Si alloy by annealing treatments [J].

Li, Mingbing ;

Wang, Xinnan ;

Wang, Kai ;

Shang, Guoqiang ;

Zhu, Liwei ;

Zhu, Zhishou ;

Zhao, Xinqing .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 :6074-6083

[39] Plastic deformation of bulk and micropillar single crystals of Mo5Si 3 with the tetragonal D8m structure [J].

Kishida, Kyosuke ;

Chen, Zhenghao ;

Matsunoshita, Hirotaka ;

Maruyama, Takuto ;

Fukuyama, Takayoshi ;

Sasai, Yuta ;

Inui, Haruyuki ;

Heilmaier, Martin .

INTERNATIONAL JOURNAL OF PLASTICITY, 2022, 155

[40] Type of Primary Nb5Si3 and Precipitation of Nbss in Nb5Si3 in a Nb-8.3Ti-21.1Si-5.4Mo-4W-0.7Hf (at.%) Near Eutectic Nb-Silicide-Based Alloy [J].

McCaughey, Conor ;

Tsakiropoulos, Panos .

MATERIALS, 2018, 11 (06)

← 1 2 3 4 5 →