Effect of Solder Volume on Interfacial Reaction between Sn-3.0Ag-0.5Cu Solder Balls and the Substrates

被引:1
作者
Yang, Fan [1 ]
Liu, Luwei [1 ]
Zhou, Qiang [1 ]
Liu, Ting [1 ]
Huang, Mingliang [1 ]
机构
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Elect Packaging Mat Lab, Dalian 116024, Peoples R China
来源
CHINA SEMICONDUCTOR TECHNOLOGY INTERNATIONAL CONFERENCE 2012 (CSTIC 2012) | 2012年 / 44卷 / 01期
关键词
CU METALLIZATION; SN-PB; KINETICS; REFLOW; PAD;
D O I
10.1149/1.3694410
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Nowadays, with the continuous miniaturization of electronic packages, the solder balls used to join chips and substrates are downsizing. While the decrease in solder size may have a detrimental effect on the reliability of solder joints. In this paper, Sn-3.0Ag-0.5Cu solder balls were reflow soldered on two kinds of pads (Cu and Ni-P) to give a comparative study of the volume effect. Cu/Sn-3.0Ag-0.5Cu and Ni-P/Sn-3.0Ag-0.5Cu joints displayed volume effect of different forms. In the reaction of Cu/Sn-3.0Ag-0.5Cu, scallop-type Cu6Sn5 grains formed at the interface. The grain size and thickness of Cu6Sn5 IMC together with the Cu consumption were influenced by solder volume. In the reaction of Ni-P/Sn-3.0Ag-0.5Cu, different type of interfacial IMCs formed for solder balls with different sizes. Changes of Cu content in solder balls play an important role in both kinds of reactions.
引用
收藏
页码:885 / 890
页数:6
相关论文
共 13 条
  • [1] The effects of solder volume and Cu concentration on the consumption rate of Cu pad during reflow soldering
    Chang, C. C.
    Lin, Y. W.
    Wang, Y. W.
    Kao, C. R.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 492 (1-2) : 99 - 104
  • [2] Ho CE, 2005, 2005 10TH INTERNATIONAL SYMPOSIUM ON ADVANCED PACKAGING MATERIALS: PROCESSES, PROPERTIES AND INTERFACES, P39
  • [3] Role of Cu in dissolution kinetics of Cu metallization in molten Sn-based solders
    Huang, ML
    Loeher, T
    Ostmann, A
    Reichl, H
    [J]. APPLIED PHYSICS LETTERS, 2005, 86 (18) : 1 - 3
  • [4] Effect of volume in interfacial reaction between eutectic Sn-3.5% Ag-0.5% Cu solder and Cu metallization in microelectronic packaging
    Islam, MN
    Sharif, A
    Chan, YC
    [J]. JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (02) : 143 - 149
  • [5] Interfacial reactions of Sn-Cu solder with Ni/Au surface finish on Cu pad during reflow and aging in ball grid array packages
    Islam, MN
    Chan, YC
    [J]. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2005, 117 (03): : 246 - 253
  • [6] Liu L. W., 2010, 2010 INT C EL PACK B, VB-46, P299
  • [7] Effects of Fine Size Lead-Free Solder Ball on the Interfacial Reactions and Joint Reliability
    Park, Yong-Sung
    Kwon, Yong-Min
    Moon, Jeong-Tak
    Lee, Young-Woo
    Lee, Jae-Hong
    Paik, Kyung-Wook
    [J]. 2010 PROCEEDINGS 60TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2010, : 1436 - 1441
  • [8] Dissolution kinetics of BGA Sn-Pb and Sn-Ag solders with Cu substrates during reflow
    Sharif, A
    Chan, YC
    [J]. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2004, 106 (02): : 126 - 131
  • [9] Effect of volume in interfacial reaction between eutectic Sn-Pb solder and Cu metallization in microelectronic packaging
    Sharif, A
    Chan, YC
    Islam, RA
    [J]. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2004, 106 (02): : 120 - 125
  • [10] Interfacial Reactions of Sn-3.0Ag-0.5Cu Solder with Cu-Mn UBM During Aging
    Tseng, Chien-Fu
    Wang, Kai-Jheng
    Duh, Jenq-Gong
    [J]. JOURNAL OF ELECTRONIC MATERIALS, 2010, 39 (12) : 2522 - 2527