A high-throughput LC-MS/MS method suitable for population biomonitoring measures five serum folate vitamers and one oxidation product

Small specimen volume and high sample throughput are key features needed for routine methods used for population biomonitoring. We modified our routine eight-probe solid phase extraction (SPE) LC-MS/MS method for the measurement of five folate vitamers [5-methyltetrahydrofolate (5-methylTHF), folic acid (FA), plus three minor forms: THF, 5-formylTHF, 5,10-methenylTHF] and one oxidation product of 5-methylTHF (MeFox) to require less serum volume (150 mu L instead of 275 mu L) by using 96-well SPE plates with 50 mg instead of 100 mg phenyl sorbent and to provide faster throughput by using a 96-probe SPE system. Total imprecision (10 days, two replicates/day) for three serum quality control pools was 2.8-3.6 % for 5-methylTHF (19.5-51.1 nmol/L), 6.6-8.7 % for FA (0.72-11.4 nmol/L), and a parts per thousand currency sign11.4 % for the minor folate forms (< 1-5 nmol/L). The mean (+/- SE) recoveries of folates spiked into serum (3 days, four levels, two replicates/level) were: 5-methylTHF, 99.4 +/- 3.6 %; FA, 100 +/- 1.8 %; minor folates, 91.7-108 %. SPE extraction efficiencies were a parts per thousand yen85 %, except for THF (78 %). Limits of detection were a parts per thousand currency sign0.3 nmol/L. The new method correlated well with our routine method [n = 150, r = 0.99 for 5-methylTHF, FA, and total folate (tFOL, sum of folate forms)] and produced slightly higher tFOL (5.6 %) and 5-methylTHF (7.3 %) concentrations, likely due to the faster 96-probe SPE process (1 vs. 5 h), resulting in improved SPE efficiency and recovery compared to the eight-probe SPE method. With this improved LC-MS/MS method, 96 samples can be processed in similar to 2 h, and all relevant folate forms can be accurately measured using a small serum volume.