Synthesis, characterization and evaluation of titanium carbonitride surface layers with varying concentrations of carbon and nitrogen

被引：20

作者：

Ajikumar, P. K. ^{[1
]}

Kamruddin, M. ^{[1
]}

Kalavathi, S. ^{[1
]}

Balamurugan, A. K. ^{[1
]}

Kataria, S. ^{[1
]}

Shankar, P. ^{[2
]}

Tyagi, A. K. ^{[1
]}

机构：

[1] Indira Gandhi Ctr Atom Res, Mat Sci Grp, Kalpakkam 603102, Tamil Nadu, India

[2] Saveetha Sch Engn, Madras, Tamil Nadu, India

来源：

CERAMICS INTERNATIONAL | 2012年 / 38卷 / 03期

关键词：

Titanium carbonitride; Microhardness; Friction coefficient; XRD; SEM; CHEMICAL-VAPOR-DEPOSITION; STRUCTURAL CHARACTERIZATION; TRIBOLOGICAL BEHAVIOR; NITRIDE COATINGS; HARD COATINGS; GAS; KINETICS; GROWTH; FILMS; TIN;

D O I：

10.1016/j.ceramint.2011.10.075

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Titanium carbonitride (TiCN) surface layers were grown by direct exposure of Ti to a gas mixture of ammonia and methane at 1050 degrees C. TiCxN1-x coatings with varying C/N ratio were synthesized by appropriately changing the content of methane and ammonia in the reactive gas mixture. The resultant layers were subjected to various characterization and evaluation techniques to study the variation of properties with respect to change in C/N ratio. A systematic change in lattice parameter and microstructure was observed as a function of the composition of active gas mixture. Friction coefficient of TiC was found to be extremely low (0.078). Reaction mechanisms for the growth of TiN and TiC were found to be entirely different. The effect of composition of the gas mixture on growth kinetics of TiCN is elucidated. (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：2253 / 2259

页数：7

共 32 条

[11] MATERIAL SELECTION FOR HARD COATINGS
HOLLECK, H
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1986, 4 (06): : 2661 - 2669
[12] Hugh O., 1996, Handbook of Refractory Carbides and Nitrides
[13] Electronic mechanism of hardness enhancement in transition-metal carbonitrides
Jhi, SH
Ihm, J
Louie, SG
Cohen, ML
[J]. NATURE, 1999, 399 (6732) : 132 - 134
[14] Thermogravimetry-evolved gas analysis-mass spectrometry system for materials research
Kamruddin, M
Ajikumar, PK
Dash, S
Tyagi, AK
Raj, B
[J]. BULLETIN OF MATERIALS SCIENCE, 2003, 26 (04) : 449 - 460
[15] Growth, microstructure, and mechanical properties of arc evaporated TiCxN1-x (0 ≤ x ≤ 1) films
Karlsson, L
Hultman, L
Johansson, MP
Sundgren, JE
Ljungcrantz, H
[J]. SURFACE & COATINGS TECHNOLOGY, 2000, 126 (01) : 1 - 14
[16] ARC DEPOSITION OF TI-C AND TI-C-N USING ACETYLENE AS A REACTIVE GAS
KNOTEK, O
LOFFLER, F
KRAMER, G
[J]. VACUUM, 1992, 43 (5-7) : 645 - 648
[17] Surface modification of titanium by a diffusional carbo-nitriding method
Matsuura, K
Kudoh, M
[J]. ACTA MATERIALIA, 2002, 50 (10) : 2693 - 2700
[18] KINETICS OF LAYER GROWTH AND MULTIPHASE DIFFUSION IN ION-NITRIDED TITANIUM
METIN, E
INAL, OT
[J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (09): : 1819 - 1832
[19] Murray J.L., 1986, BINARY ALLOY PHASE D, V1, P888
[20] Effect of carrier gas on the deposition of titanium carbo-nitride coatings by a novel organo-metallic plasma immersion ion processing technique
Peters, AM
Nastasi, M
[J]. VACUUM, 2002, 67 (02) : 169 - 175

← 1 2 3 4 →