Bending under tension test with direct friction measurement

被引：38

作者：

Andreasen, JL ^{[1
]}

Olsson, DD ^{[1
]}

Chodnikiewicz, K ^{[1
]}

Bay, N ^{[1
]}

机构：

[1] Tech Univ Denmark, Dept Mfg Engn & Management, DK-2800 Lyngby, Denmark

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2006年 / 220卷 / 01期

关键词：

sheet metal forming; tribology; lubricant testing;

D O I：

10.1243/095440505X32913

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A special bending-under-tension (BUT) transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool pin under constant back tension. The front tension, back tension, and torque on the tool pin are all measured directly, thus enabling accurate measurement of friction and direct determination of lubricant film breakdown for varying normal pressure, sliding speed, tool radius, and tool preheat temperature. The transducer is applied in an experimental investigation focusing on limits of lubrication in drawing of stainless steel, showing the influence of varying process conditions and the performance of different lubricants.

引用

页码：73 / 80

页数：8

共 50 条

[21] Semi-analytical approach for plane strain sheet metal forming using a bending-under-tension numerical model
Le Quilliec, Guenhael
Breitkopf, Piotr
Roelandt, Jean-Marc
Juillard, Pierre
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2014, 7 (02) : 221 - 232
[22] Semi-analytical approach for plane strain sheet metal forming using a bending-under-tension numerical model
Guénhaël Le Quilliec
Piotr Breitkopf
Jean-Marc Roelandt
Pierre Juillard
International Journal of Material Forming, 2014, 7 : 221 - 232
[23] Abrasion and Friction Test Methods of Rubber
Wada, Noriaki
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2008, 53 (08) : 506 - 511
[24] Numerical investigation of a friction test to determine the friction coefficients for the clinching process
Bielak, Ch R.
Boehnke, M.
Bobbert, M.
Meschut, G.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2022, 236 (06) : 1225 - 1235
[25] Detection of the real plastification in a biaxial tension test
Hussnaetter, Wolfgang
SHEET METAL 2007, 2007, 344 : 105 - 112
[26] DEVELOPMENT OF A HOUSING FOR ON-LINE-WEAR-ANALYSIS OF CLUTCH LINING PADS UNDER DRY FRICTION ON TEST BENCHES
Albers, Albert
Kelemen, Simon
ANNALS OF DAAAM FOR 2009 & PROCEEDINGS OF THE 20TH INTERNATIONAL DAAAM SYMPOSIUM, 2009, 20 : 517 - 518
[27] Evaluation of the Coulomb friction coefficient by the Erichsen Test
Giuliano, G.
MACHINE DESIGN AND MANUFACTURING ENGINEERING II, PTS 1 AND 2, 2013, 365-366 : 1190 - 1193
[28] Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming
Recklin, Viktor
Dietrich, Florian
Groche, Peter
LUBRICANTS, 2018, 6 (02)
[29] Simultaneous measurement of friction and wear in hip simulators
Haider, Hani
Weisenburger, Joel N.
Garvin, Kevin L.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2016, 230 (05) : 373 - 388
[30] Modeling of springback, strain rate and Bauschinger effects for two-dimensional steady state cyclic flow of sheet metal subjected to bending under tension
Sanchez, L. R.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2010, 52 (03) : 429 - 439

← 1 2 3 4 5 →