A novel rolling bearing fault diagnosis method based on generalized nonlinear spectral sparsity

被引:18
作者
Han, Baokun [1 ]
Yang, Zujie [1 ]
Zhang, Zongzhen [1 ,2 ]
Bao, Huaiqian [1 ]
Wang, Jinrui [1 ]
Liu, Zongling [1 ]
Li, Shunming [2 ]
机构
[1] Shandong Univ Sci & Technol, Coll Mech & Elect Engn, Qingdao 266000, Peoples R China
[2] Nanjing Univ Aeronaut & Astronaut, Coll Energy & Power Engn, Nanjing 210016, Peoples R China
基金
中国国家自然科学基金;
关键词
Norm; Fast kurtogram; Bearing; Sparse expression; Fault diagnosis; CORRELATED KURTOSIS DECONVOLUTION; MINIMUM ENTROPY DECONVOLUTION; FAST KURTOGRAM;
D O I
10.1016/j.measurement.2022.111131
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the fast kurtogram (FK), kurtosis is used as an indicator to locate the fault frequency band, and is widely aplied to fault diagnosis. However, kurtosis has been proven to favor a single large impulse rather than the required small fault characteristics, especially in the strong interference environment. To eliminate the impact of largeamplitude impact and further improve the accuracy of fault extraction, a method based on generalized nonlinear spectral sparsity (GNSS) is proposed for fault diagnosis of bearings. First, Z-score normalization and generalized nonlinear sigmoid activation function are used for signal preprocessing, and the scale distribution of the signal will be changed to eliminate the effects of large amplitude shocks under noisy environment. Then, to improve the sparsity measure capability, an improved L-3/2 norm is used to replace kurtosis as the basis for selecting the best resonance frequency band. Finally, the effectiveness of the GNSS is verified by simulation data and experimental data. Compared with FK method, the performance of fault extraction of the proposed method is significantly improved, especially for the interference of abnormal impact.
引用
收藏
页数:12
相关论文
共 23 条
  • [1] The spectral kurtosis: a useful tool for characterising non-stationary signals
    Antoni, J
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2006, 20 (02) : 282 - 307
  • [2] Fast computation of the kurtogram for the detection of transient faults
    Antoni, Jerome
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2007, 21 (01) : 108 - 124
  • [3] A novel method for the optimal band selection for vibration signal demodulation and comparison with the Kurtogram
    Barszcz, Tomasz
    Jablonski, Adam
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2011, 25 (01) : 431 - 451
  • [4] Sparse ICA for blind separation of transmitted and reflected images
    Bronstein, AM
    Bronstein, MM
    Zibulevsky, M
    Zeevi, YY
    [J]. INTERNATIONAL JOURNAL OF IMAGING SYSTEMS AND TECHNOLOGY, 2005, 15 (01) : 84 - 91
  • [5] Die XP, 2019, PROCEEDINGS OF 2019 IEEE 3RD INFORMATION TECHNOLOGY, NETWORKING, ELECTRONIC AND AUTOMATION CONTROL CONFERENCE (ITNEC 2019), P2088, DOI [10.1109/itnec.2019.8729237, 10.1109/ITNEC.2019.8729237]
  • [7] DETECTION OF ROLLING ELEMENT BEARING DAMAGE BY STATISTICAL VIBRATION ANALYSIS
    DYER, D
    STEWART, RM
    [J]. JOURNAL OF MECHANICAL DESIGN-TRANSACTIONS OF THE ASME, 1978, 100 (02): : 229 - 235
  • [8] Modified Deep Autoencoder Driven by Multisource Parameters for Fault Transfer Prognosis of Aeroengine
    He, Zhiyi
    Shao, Haidong
    Ding, Ziyang
    Jiang, Hongkai
    Cheng, Junsheng
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2022, 69 (01) : 845 - 855
  • [9] Comparing Measures of Sparsity
    Hurley, Niall
    Rickard, Scott
    [J]. IEEE TRANSACTIONS ON INFORMATION THEORY, 2009, 55 (10) : 4723 - 4741
  • [10] Sparse filtering with the generalized lp/lq norm and its applications to the condition monitoring of rotating machinery
    Jia, Xiaodong
    Zhao, Ming
    Di, Yuan
    Li, Pin
    Lee, Jay
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, 102 : 198 - 213