300-GHz-Band 120-Gb/s Wireless Front-End Based on InP-HEMT PAs and Mixers

被引：138

作者：

Hamada, Hiroshi ^{[1
]}

Tsutsumi, Takuya ^{[1
]}

Matsuzaki, Hideaki ^{[1
]}

Fujimura, Takuya ^{[2
]}

Abdo, Ibrahim ^{[2
]}

Shirane, Atsushi ^{[2
]}

Okada, Kenichi ^{[2
]}

Itami, Go ^{[1
]}

Song, Ho-Jin ^{[1
,3
]}

Sugiyama, Hiroki ^{[1
]}

Nosaka, Hideyuki ^{[1
]}

机构：

[1] NTT Corp, NTT Device Technol Labs, Atsugi, Kanagawa 2430198, Japan

[2] Tokyo Inst Technol, Dept Elect & Elect Engn, Ookayama Campus, Tokyo 1528550, Japan

[3] Pohang Univ Sci & Technol, Dept Elect Engn, Pohang 37673, South Korea

来源：

IEEE JOURNAL OF SOLID-STATE CIRCUITS | 2020年 / 55卷 / 09期

关键词：

Wireless communication; Mixers; Radio frequency; Integrated circuits; Gain; Noise measurement; 5G mobile communication; 300-GHz band; beyond-5G; InP-based high-electron-mobility-transistor (InP-HEMT); mixer; power amplifier (PA); wireless transceiver; GHZ; TRANSMISSION; TECHNOLOGIES; FEASIBILITY; TRANSMITTER; AMPLIFIER; RECEIVER; DESIGN; SYSTEM; LINK;

D O I：

10.1109/JSSC.2020.3005818

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

We developed a 300-GHz-band 120-Gb/s wireless transceiver front-ends (TRX) using our in-house InP-based high-electron-mobility-transistor (InP-HEMT) technology for beyond-5G. The TRX is composed of the RF power amplifiers (PAs), mixers, and local oscillation (LO) PAs which are all packaged in individual waveguide (WG) modules by using a ridge coupler for low-loss WG-to-IC transition. RF PAs are designed using the low-impedance inter-stage-matching technique to reduce the inter-stage matching loss of the amplifier stages, and the back-side DC line (BDCL) technique is used to simplify the layout and to improve the gain of the PAs. The fabricated RF PAs show a high output 1-dB compression point of more than 6 dBm from 278 to 302 GHz. The mixers are used for both up- and down-conversion in the transmitter and receiver. These mixers are designed to have high conversion gain (CG) over the wideband even after packaging by enhancing the isolation between the RF and IF ports. The measured CG of mixer module is -15 dB, and the 3-dB IF-bandwidth is 32 GHz. The LO PAs are also designed using the BDCL technique so that they can supply the required LO power to the mixers. The TRX with these InP building blocks enables the data transmission of a 120 Gb/s 16QAM signal over a link distance of 9.8 m.

引用

页码：2316 / 2335

页数：20

共 44 条

[41] Feasibility Study of Wafer-Level Backside Process for InP-Based ICs [J].

Tsutsumi, Takuya ;

Hamada, Hiroshi ;

Sano, Kimikazu ;

Ida, Minoru ;

Matsuzaki, Hideaki .

IEEE TRANSACTIONS ON ELECTRON DEVICES, 2019, 66 (09) :3771-3776

[42] ABSORPTION IN 220-GHZ ATMOSPHERIC WINDOW [J].

ULABY, FT .

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 1973, AP21 (02) :266-269

[43] Analysis and Design of High-Order QAM Direct-Modulation Transmitter for High-Speed Point-to-Point mm-Wave Wireless Links [J].

Wang, Huan ;

Mohammadnezhad, Hossein ;

Heydari, Payam .

IEEE JOURNAL OF SOLID-STATE CIRCUITS, 2019, 54 (11) :3161-3179

[44]

Yu XB, 2015, INT C PHOTONIC SWIT, P4, DOI [10.1109/PS.2015.7328934, 10.1109/ICICS.2015.7459878]

← 1 2 3 4 5 →