Effect of straight micro fins on heat transfer and pressure drop of R410A during evaporation in round tubes

The objective of this paper is to present the influence of straight micro-fins on heat transfer coefficient and pressure drop. R410A flow boiling experiments were conducted in both smooth tube and the axial micro-finned tube. Data are taken at 10 degrees C saturation temperature for the vapor quality from 0.1 to 0.9, mass flux from 100 to 450 kg/s-m(2), and heat flux from 10 to 20 kW/m(2). The results in the smooth tube were compared with several correlations and used as a baseline. It was observed that straight micro-fin structure played an important role in the evaporative heat transfer. The heat transfer coefficient was significantly enhanced in the axial micro-finned tube, whose enhancement factor ranged from 1.03 to 1.48 with average of 1.34. As the mass flux and vapor quality was low, the straight micro-fins had stronger influence of the heat transfer coefficient since the liquid-phase refrigerant was easily trapped in the grooves of the axial micro-finned tube. The pressure drop penalty factor of the axial micro finned tube ranged from 0.66 to 1.6, and the average was around 1.23. (C) 2017 Elsevier Ltd. All rights reserved.