Effects of sintering atmosphere on microstructure and mechanical property of sintered powder metallurgy 316L stainless steel

被引：68
作者：
Kurgan, Naci [1 ]
机构：
[1] Karabuk Univ, Fac Engn, Dept Mech Engn, Karabuk, Turkey
来源：
MATERIALS & DESIGN | 2013年 / 52卷
关键词：
CORROSION BEHAVIOR; NITROGEN; DUPLEX; GAS;
D O I：
10.1016/j.matdes.2013.06.035
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, nitrogen and argon were used as the sintering atmosphere for AISI 316L stainless steel compacts. The effects of sintering atmosphere on sintered density, grain morphology and mechanical properties were investigated. The mechanical and microstructural characteristics of the sintered compacts were evaluated using optical microscopy, and scanning electron microscope. Tensile strength and hardness of the compacts sintered in nitrogen atmosphere are 290 MPa and 355.2 HV0.1, respectively. When argon was used as the sintering atmosphere, the tensile strength and hardness of the 316L stainless steel sintered compacts have become 226 MPa and 181.8 HV0.1 respectively. The results of this study indicate that the compacts sintered in nitrogen atmosphere exhibits higher strength and hardness than that of the steels sintered in argon atmosphere. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：995 / 998
页数：4
相关论文
共 28 条
[11]   Influence of Sintering under Nitrogen Atmosphere on Microstructures of Powder Metallurgy Duplex Stainless Steels [J].
Garcia, C. ;
Martin, F. ;
Blanco, Y. ;
De Tiedra, M. P. ;
Aparicio, M. L. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (02) :292-301
[12]   Effects of processing and manufacturing of high nitrogen-containing stainless steels on their mechanical, corrosion and wear properties [J].
Hänninen, H ;
Romu, J ;
Ilola, R ;
Tervo, J ;
Laitinen, A .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) :424-430
[13]   Effects of sintering atmosphere on the microstructure and mechanical property of sintered 316L stainless steel [J].
Li, SL ;
Huang, BY ;
Li, YM ;
Liang, SQ ;
Li, DX ;
Fan, JL ;
Jiang, F .
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2003, 10 (01) :1-6
[14]   Microstructure and mechanical behaviour of single pressed and vacuum sintered gas and water atomised 316L stainless steel powders [J].
Lindstedt, U ;
Karlsson, B .
POWDER METALLURGY, 1998, 41 (04) :261-268
[15]   Effect of nitrogen on corrosion behavior of 28Cr-7Ni duplex and microduplex stainless steels in air-saturated 3.5 wt% NaCl solution [J].
Lothongkum, G ;
Wongpanya, P ;
Morito, S ;
Furuhara, T ;
Maki, T .
CORROSION SCIENCE, 2006, 48 (01) :137-153
[16]   Effect of sintering atmosphere on structure and properties of austeno-ferritic stainless steels [J].
Mariappan, R. ;
Kumaran, S. ;
Rao, T. Srinivasa .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2) :328-333
[17]   Effect of chemical composition and sintering conditions on the mechanical properties of sintered duplex stainless steels [J].
Martin, F. ;
Garcia, C. ;
Blanco, Y. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (29-30) :8500-8511
[18]   Aqueous corrosion behaviour of sintered stainless steels manufactured from mixes of gas atomized and water atomized powders [J].
Moral, C. ;
Bautista, A. ;
Velasco, F. .
CORROSION SCIENCE, 2009, 51 (08) :1651-1657
[19]   INFLUENCE OF MICROSTRUCTURE ON THE CORROSION-RESISTANCE OF AISI TYPE 304L AND TYPE 316L SINTERED STAINLESS-STEELS EXPOSED TO FERRIC-CHLORIDE SOLUTION [J].
OTERO, E ;
PARDO, A ;
UTRILLA, MV ;
SAENZ, E ;
PEREZ, FJ .
MATERIALS CHARACTERIZATION, 1995, 35 (03) :145-151
[20]   Effect of sintering temperature on the mechanical and electrochemical properties of austenitic stainless steel [J].
Pandya, Shishir ;
Ramakrishna, K. S. ;
Annamalai, A. Raja ;
Upadhyaya, Anish .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 556 :271-277
123