Macro defects in direct laser deposition process

被引：10
作者：
Vildanov, A. M. [1 ]
Babkin, K. D. [1 ,2 ]
Alekseeva, E. V. [3 ]
机构：
[1] Peter Great St Petersburg Polytech Univ, St Petersburg 195251, Russia
[2] St Petersburg State Marine Tech Univ, St Petersburg 190121, Russia
[3] Natl Univ Sci & Technol MISIS, Moscow 119049, Russia
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 30卷
关键词：
ALLOY;
D O I：
10.1016/j.matpr.2020.01.041
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Currently, direct laser deposition technology is used to create products with complex geometry in various industries, such as: aircraft engine building, shipbuilding, and the energy industry. This technology allows made workpieces with minimal subsequent machining. Parts manufactured for these areas should have the required performance characteristics. The mechanical properties of products obtained using direct laser deposition technology are affected by internal and surface defects: pores, non-fusion, cracks, and roughness, since they are the main stress concentrators. This article describes such internal defects as pores and non-fusion in different situations, identifies the causes of their occurrence and considers their elimination methods. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：523 / 527
页数：5
相关论文
共 50 条
[41]   In process monitoring of the thermal profile during solidification in laser directed energy deposition of aluminium [J].
Hagenlocher, Christian ;
O'Toole, Patrick ;
Xu, Wei ;
Brandt, Milan ;
Easton, Mark ;
Molotnikov, Andrey .
ADDITIVE MANUFACTURING LETTERS, 2022, 3
[42]   High-speed imaging and process characterization of coaxial laser metal wire deposition [J].
Motta, Maurizio ;
Demir, Ali Gokhan ;
Previtali, Barbara .
ADDITIVE MANUFACTURING, 2018, 22 :497-507
[43]   Tailoring alloy 718 laser directed energy deposition process strategies for repair applications [J].
Jamieson, Cory D. ;
Brennan, Marissa C. ;
Spurgeon, Todd J. ;
Brown, Stephen W. ;
Keist, Jayme S. ;
Reutzel, Edward W. .
JOURNAL OF LASER APPLICATIONS, 2022, 34 (01)
[44]   Effect of Laser Cladding Parameters in Laser Direct Metal Deposition (LDMD) of Martensitic Stainless Steel Powder on Ductile Cast Iron [J].
Aydin, H. ;
Altay, M. ;
Karsi, A. ;
Ergin, D. ;
Onayli, A. ;
Bayram, A. .
LASERS IN ENGINEERING, 2022, 52 (1-3) :87-106
[45]   Enhancing productivity and efficiency in conventional laser metal deposition process for Inconel 718?-?part I: the effects of the process parameters [J].
Maffia, Simone ;
Chiappini, Federico ;
Maggiani, Gianluca ;
Furlan, Valentina ;
Guerrini, Massimo ;
Previtali, Barbara .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 128 (11-12) :5353-5372
[46]   Altering microstructure and enhancing mechanical properties during direct energy deposition of Ti-6Al-4V via in-process laser heat treatments [J].
Abdesselam, K. A. ;
Gaudez, S. ;
Van Petegem, S. ;
Honkimaki, V. ;
Hallais, S. ;
Cornet, L. ;
Vallet, M. ;
Upadhyay, M. V. .
MATERIALS & DESIGN, 2025, 254
[47]   Feasibility investigation of direct laser cutting process of metal foam with high pore density [J].
Liu, Yangxu ;
Zhou, Wei ;
Chu, Xuyang ;
Liu, Shaoyu ;
Hui, Kwan San .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (5-8) :2803-2814
[48]   Direct laser metal deposition of WC/Co/Cr powder by means of the functionally graded materials strategy [J].
Angelastro, A. ;
Campanelli, S. L. .
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2017, 5 (04)
[49]   Grain size manipulation by wire laser direct energy deposition of 316L with ultrasonic assistance [J].
Heidowitzsch, Maximilian ;
Gerdt, Leonid ;
Samuel, Conrad ;
Maetje, Jacob-Florian ;
Kaspar, Joerg ;
Riede, Mirko ;
Lopez, Elena ;
Brueckner, Frank ;
Leyens, Christoph .
JOURNAL OF LASER APPLICATIONS, 2023, 35 (03)
[50]   Inconel 625/AISI 413 Stainless Steel Functionally Graded Material Produced by Direct Laser Deposition [J].
Ferreira, Andre Alves ;
Emadinia, Omid ;
Cruz, Joao Manuel ;
Reis, Ana Rosanete ;
Vieira, Manuel Fernando .
MATERIALS, 2021, 14 (19)
12345