Macro defects in direct laser deposition process

被引：10

作者：

Vildanov, A. M. ^{[1
]}

Babkin, K. D. ^{[1
,2
]}

Alekseeva, E. V. ^{[3
]}

机构：

[1] Peter Great St Petersburg Polytech Univ, St Petersburg 195251, Russia

[2] St Petersburg State Marine Tech Univ, St Petersburg 190121, Russia

[3] Natl Univ Sci & Technol MISIS, Moscow 119049, Russia

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 30卷

关键词：

ALLOY;

D O I：

10.1016/j.matpr.2020.01.041

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Currently, direct laser deposition technology is used to create products with complex geometry in various industries, such as: aircraft engine building, shipbuilding, and the energy industry. This technology allows made workpieces with minimal subsequent machining. Parts manufactured for these areas should have the required performance characteristics. The mechanical properties of products obtained using direct laser deposition technology are affected by internal and surface defects: pores, non-fusion, cracks, and roughness, since they are the main stress concentrators. This article describes such internal defects as pores and non-fusion in different situations, identifies the causes of their occurrence and considers their elimination methods. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：523 / 527

页数：5

共 50 条

[21] GRCop-42: Comparison between laser powder bed fusion and laser powder direct energy deposition [J].

Demeneghi, Gabriel ;

Gradl, Paul ;

Mayeur, Jason R. ;

Hazeli, Kavan .

ADDITIVE MANUFACTURING LETTERS, 2024, 10

[22] Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition [J].

Ma, Liang ;

Kong, Xiangwei ;

Liang, Jingjing ;

Li, Jinguo ;

Feng, He ;

Ci, Shiwei ;

Zhang, Xue ;

Sun, Cong ;

Jin, Zhibo .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 :1231-1244

[23] Process analysis of direct laser melting to fabricate layered hybrid beads [J].

Jang, Jeong-hwan ;

Mun, Sung-min ;

Kim, Tae-hyun ;

Moon, Young-hoon .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 :S813-S819

[24] Heat Treatment of Corrosion Resistant Steel for Water Propellers Fabricated by Direct Laser Deposition [J].

Mendagaliev, Ruslan ;

Klimova-Korsmik, Olga ;

Promakhov, Vladimir ;

Schulz, Nikita ;

Zhukov, Alexander ;

Klimenko, Viktor ;

Olisov, Andrey .

MATERIALS, 2020, 13 (12) :1-9

[25] Laser Direct Metal Deposition Technology and Microstructure and Composition Segregation of Inconel 718 Superalloy [J].

Jyoti Mazumder .

Journal of Iron and Steel Research(International), 2011, 18 (04) :73-78

[26] Inconel 625/TiB2 Metal Matrix Composites by Direct Laser Deposition [J].

Promakhov, Vladimir ;

Zhukov, Alexander ;

Ziatdinov, Mansur ;

Zhukov, Ilya ;

Schulz, Nikita ;

Kovalchuk, Sergey ;

Dubkova, Yana ;

Korsmik, Rudolf ;

Klimova-Korsmik, Olga ;

Turichin, Gleb ;

Perminov, Anton .

METALS, 2019, 9 (02)

[27] Metal matrix composites with ternary intermetallic inclusions fabricated by laser direct energy deposition [J].

Shishkovsky, Igor ;

Missemer, Floran ;

Smurov, Igor .

COMPOSITE STRUCTURES, 2018, 183 :663-670

[28] Laser Direct Metal Deposition Technology and Microstructure and Composition Segregation of Inconel 718 Superalloy [J].

Zhang Qun-li ;

Yao Jian-hua ;

Mazumder, Jyoti .

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 (04) :73-78

[29] Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling [J].

Inaki Arrizubieta, Jon ;

Lamikiz, Aitzol ;

Klocke, Fritz ;

Martinez, Silvia ;

Arntz, Kristian ;

Ukar, Eneko .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 115 :80-91

[30] EXPERIMENTAL ANALYSIS OF POROSITY FORMATION IN LASER-ASSISTED POWDER DEPOSITION PROCESS [J].

Wang, L. ;

Pratt, P. ;

Felicelli, S. D. ;

El Kadiri, H. ;

Berry, J. T. ;

Wang, P. T. ;

Horstemeyer, M. F. .

TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES, 2009, :389-+

← 1 2 3 4 5 →