Macro defects in direct laser deposition process

被引：10

作者：

Vildanov, A. M. ^{[1
]}

Babkin, K. D. ^{[1
,2
]}

Alekseeva, E. V. ^{[3
]}

机构：

[1] Peter Great St Petersburg Polytech Univ, St Petersburg 195251, Russia

[2] St Petersburg State Marine Tech Univ, St Petersburg 190121, Russia

[3] Natl Univ Sci & Technol MISIS, Moscow 119049, Russia

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 30卷

关键词：

ALLOY;

D O I：

10.1016/j.matpr.2020.01.041

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Currently, direct laser deposition technology is used to create products with complex geometry in various industries, such as: aircraft engine building, shipbuilding, and the energy industry. This technology allows made workpieces with minimal subsequent machining. Parts manufactured for these areas should have the required performance characteristics. The mechanical properties of products obtained using direct laser deposition technology are affected by internal and surface defects: pores, non-fusion, cracks, and roughness, since they are the main stress concentrators. This article describes such internal defects as pores and non-fusion in different situations, identifies the causes of their occurrence and considers their elimination methods. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：523 / 527

页数：5

共 21 条

[1]

[Anonymous], 2018, J PHYS CONF SER

[2]

[Anonymous], 2018, J PHYS CONF SER

[3]

[Anonymous], 2007, MAT PROPERTIES HDB T

[4]

Babkin K.D., 2016, P SCI PRACTICAL C RE, P501

[5] Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition [J].

Baufeld, Bernd ;

Brandl, Erhard ;

van der Biest, Omer .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (06) :1146-1158

[6] Electron beam melted Ti-6Al-4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material [J].

de Formanoir, Charlotte ;

Michotte, Sebastien ;

Rigo, Olivier ;

Germain, Lionel ;

Godet, Stephane .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 652 :105-119

[7]

Donachie M., 2007, Titanium: A Technical Guide

[8]

Glukhov Vladimir, 2016, Key Engineering Materials, V684, P461, DOI 10.4028/www.scientific.net/KEM.684.461

[9] Laser additive manufacturing of metallic components: materials, processes and mechanisms [J].

Gu, D. D. ;

Meiners, W. ;

Wissenbach, K. ;

Poprawe, R. .

INTERNATIONAL MATERIALS REVIEWS, 2012, 57 (03) :133-164

[10] Technology of high-speed direct laser deposition from Ni-based superalloys [J].

Klimova-Korsmik, Olga ;

Turichin, Gleb ;

Zemlyakov, Evgeniy ;

Babkin, Konstantin ;

Petrovsky, Pavel ;

Travyanov, Andrey .

LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016, 2016, 83 :716-722

← 1 2 3 →