Implementation of Acoustic Materials to the VLS-1 Fairing - A Sensitivity Analysis Using SEA

被引:0
|
作者
Pirk, Rogerio [1 ]
Souto, Carlos d'Andrade [1 ]
机构
[1] Inst Aeronaut & Space, Div Integrat & Tests, BR-12228904 Sao Jose Dos Campos, SP, Brazil
关键词
statistical energy analysis; acoustic materials; sound attenuation; launchers; fairing;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Satellite launchers are submitted to severe acoustic loads mainly during lift-off where SPL achieve, at the upper parts, values within the range of 140-160 dB. Such an excitation can damage embedded elements, if energy attenuation measures are not adopted. In view of managing the PLF vibro-acoustic environment, numerical techniques are applied to predict elasto-acoustic behavior. This manuscript presents a numerical study on the design of acoustic insulation for the VLS-1 fairing compartment. An excitation profile based on the literature is applied on a SEA coupled model of this structural-acoustic system and absorbing materials are added to the model. Two parameters of the absorbing material layer are analyzed: thickness and covered area. Two NCT modeling approaches are used to simulate the effect of blanketing the VLS-1 fairing: acoustic materials Biot's parameters, given by the manufacturer, and material samples absorption coefficient, measured in a Kundt Tube. Results show that an increase in the blanket thickness from 7.62 to 12.7 cm results in a TL of 1.7 dB OSPL, while variations of up to 3.0 dB OSPL are calculated if the fairing cavity blanketed area varies from 30% to 100%.
引用
收藏
页码:82 / 88
页数:7
相关论文
共 50 条
  • [21] DESIGN SENSITIVITY ANALYSIS OF STRUCTURAL-ACOUSTIC SYSTEM USING FEM AND WBM
    Koo, Kunmo
    Wang, Semyung
    Pluymers, Bert
    Desmet, Wim
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONGRESS ON SOUND AND VIBRATION, 2010,
  • [22] Sensitivity analysis of coupled structural-acoustic problems using perturbation techniques
    Hahn, SR
    Ferri, AA
    JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1997, 101 (02): : 918 - 924
  • [23] Shape design sensitivity analysis of acoustic problems using a boundary element method
    Koo, BU
    COMPUTERS & STRUCTURES, 1997, 65 (05) : 713 - 719
  • [24] Acoustic Sensitivity Analysis Using the Distributed Source Energy Boundary Point Method
    Chen, Litao
    Chen, Jian
    Zhang, Bingrong
    Zhang, Wu
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 76 - 79
  • [25] Sensitivity analysis of flexible multibody systems using composite materials components
    Neto, Maria Aligusta
    Ambrosio, Jorge A. C.
    Leal, Rogerio Pereira
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2009, 77 (03) : 386 - 413
  • [26] Exploring the strategic environmental assessment (SEA) process behaviour using sensitivity analysis
    Onyango, Vincent
    IMPACT ASSESSMENT AND PROJECT APPRAISAL, 2016, 34 (02) : 160 - 175
  • [27] Shape sensitivity analysis of sequential structural-acoustic problems using FEM and BEM
    Kim, NH
    Dong, J
    JOURNAL OF SOUND AND VIBRATION, 2006, 290 (1-2) : 192 - 208
  • [28] Acoustic design sensitivity analysis for interior spaces using the multi-domain bem
    Jeong, JH
    Ih, JG
    Lee, BC
    JOURNAL OF COMPUTATIONAL ACOUSTICS, 2005, 13 (01) : 127 - 144
  • [29] Vibro-acoustic design sensitivity analysis using the wave-based method
    Koo, Kunmo
    Pluymers, Bert
    Desmet, Wim
    Wang, Semyung
    JOURNAL OF SOUND AND VIBRATION, 2011, 330 (17) : 4340 - 4351
  • [30] Acoustic Design Sensitivity Analysis of 3D vibro-acoustic problems using the Wave Based Method
    Koo, K.
    Pluymers, B.
    Desmet, W.
    Wang, S.
    PROCEEDINGS OF ISMA2010 - INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING INCLUDING USD2010, 2010, : 2371 - 2380