Large-eddy simulation of turbulent flow and structures within and above an idealized building array

被引:4
|
作者
Saeedi, M. [1 ,2 ]
Wang, B. -C. [3 ]
机构
[1] Amirkabir Univ Technol, Aerosp Engn Dept, Tehran, Iran
[2] Amirkabir Univ Technol, Ctr Excellence Computat Aerosp, Tehran, Iran
[3] Univ Manitoba, Dept Mech Engn, Winnipeg, MB R3T 5V6, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
Large-eddy simulation; Turbulence; Bluff body; Idealized urban environment; MUST array; SUBGRID-SCALE STRESS; EFFICIENT GENERATION; INCOMPRESSIBLE-FLOW; MOUNTED OBSTACLES; INFLOW CONDITIONS; BOUNDARY-LAYER; WIND-TUNNEL; MEAN FLOW; DISPERSION; CYLINDER;
D O I
10.1007/s10652-017-9540-1
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In this research, wall-modeled LES has been performed to investigate turbulent flow in an idealized urban environment comprised of an array of rectangular buildings (MUST array). An inflow condition based on generation of grid turbulence is utilized to mimic the turbulent approaching boundary layer at the inlet of the computational domain. The numerical approach has been validated by comparing the first-and second-order statistical moments of the turbulent flow field against the available water-channel measurement data. Turbulent coherent flow structures, energy spectra, and budget balance of the resolved kinetic energy are investigated. With the aid of the dynamic nonlinear subgrid-scale (SGS) stress model, the backscatter of the kinetic energy from small to large scales of flow motions is also studied. It is found that the scatter of kinetic energy is sensitive to the presence of the building obstacles. As the elevation increases, the ratio of the SGS dissipation rate to the viscous dissipation rate remains stable under the backward scatter condition but varies significantly under the forward scatter condition.
引用
收藏
页码:1127 / 1152
页数:26
相关论文
共 50 条
  • [1] Large-eddy simulation of turbulent flow and structures within and above an idealized building array
    M. Saeedi
    B.-C. Wang
    Environmental Fluid Mechanics, 2017, 17 : 1127 - 1152
  • [2] A Large-Eddy Simulation Study of Thermal Effects on Turbulence Coherent Structures in and above a Building Array
    Park, Seung-Bu
    Baik, Jong-Jin
    JOURNAL OF APPLIED METEOROLOGY AND CLIMATOLOGY, 2013, 52 (06) : 1348 - 1365
  • [3] Large-Eddy Simulation of Flow and Pollutant Transports in and Above Two-Dimensional Idealized Street Canyons
    Cheng, W. C.
    Liu, Chun-Ho
    BOUNDARY-LAYER METEOROLOGY, 2011, 139 (03) : 411 - 437
  • [4] Large-Eddy Simulation of Coherent Flow Structures within a Cubical Canopy
    Inagaki, Atsushi
    Castillo, Marieta Cristina L.
    Yamashita, Yoshimi
    Kanda, Manabu
    Takimoto, Hiroshi
    BOUNDARY-LAYER METEOROLOGY, 2012, 142 (02) : 207 - 222
  • [5] Large-Eddy Simulation of Flow and Pollutant Transports in and Above Two-Dimensional Idealized Street Canyons
    W. C. Cheng
    Chun-Ho Liu
    Boundary-Layer Meteorology, 2011, 139 : 411 - 437
  • [6] Adjustment of Turbulent Boundary-Layer Flow to Idealized Urban Surfaces: A Large-Eddy Simulation Study
    Cheng, Wai-Chi
    Porte-Agel, Fernando
    BOUNDARY-LAYER METEOROLOGY, 2015, 155 (02) : 249 - 270
  • [7] Large-Eddy Simulation of Neutrally-Stratified Turbulent Flow Within and Above Plant Canopy Using the Central-Moments-Based Lattice Boltzmann Method
    Watanabe, Tsutomu
    Shimoyama, Kou
    Kawashima, Masayuki
    Mizoguchi, Yasuko
    Inagaki, Atsushi
    BOUNDARY-LAYER METEOROLOGY, 2020, 176 (01) : 35 - 60
  • [8] Large-eddy simulation of accelerated turbulent flow in a circular pipe
    Jung, Seo Yoon
    Chung, Yongmann M.
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2012, 33 (01) : 1 - 8
  • [9] Large-Eddy Simulation of Coherent Flow Structures within a Cubical Canopy
    Atsushi Inagaki
    Marieta Cristina L. Castillo
    Yoshimi Yamashita
    Manabu Kanda
    Hiroshi Takimoto
    Boundary-Layer Meteorology, 2012, 142 : 207 - 222
  • [10] Large-eddy Simulation of Transient Turbulent Flow in a Pipe
    Jung, Seo Yoon
    Chung, Yongmann M.
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2008, 32 (09) : 720 - 727