Microstructure evolution of laser deposited Ti60A titanium alloy during cyclic thermal exposure

被引：5

作者：

Zhang, A-li ^{[1
]}

Liu, Dong ^{[1
]}

Tang, Hai-bo ^{[1
]}

Wang, Hua-ming ^{[1
]}

机构：

[1] Beihang Univ, Minist Educ Laser Direct Mfg Large Metall Compone, Engn Res Ctr, Beijing 100191, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2013年 / 23卷 / 11期

关键词：

laser melting deposition; titanium alloy; cyclic thermal exposure; microstructure; TENSILE PROPERTIES; TI-6AL-4V;

D O I：

10.1016/S1003-6326(13)62860-5

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Cyclic thermal exposure tests of infrared heating to 800 degrees C in 120 s followed by compressed air cooling to 150 degrees C in 60 s were performed for the laser deposited Ti60A (Ti5.54Al3.38Sn3.34Zr0.37Mo0.46Si) alloy. The effects of thermal exposure cycles on length of beta phase, area fraction of alpha phase and microhardness of alloy were examined by OM, SEM and EDS. The results indicate that thermal exposure cycles have significant effects on length of beta phase, area fraction of alpha phase and microhardness of the alloy. The original fine basket-weave beta and 78.5% alpha transform to transient wedge-like beta, finally leaving granular beta and 97.6% coarsened alpha with the increased thermal exposure cycles. The formation mechanism of coarsened alpha and broken-up beta microstructure is discussed. The alloy after 750 thermal exposure cycles has the maximum microhardness, 33.3% higher than that of the as-deposited alloy.

引用

页码：3249 / 3256

页数：8

共 25 条

[11] Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites
Liu, D.
Zhang, S. Q.
Li, A.
Wang, H. M.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 485 (1-2) : 156 - 162
[12] Liu Jian-di, 2012, Chinese Journal of Nonferrous Metals, V22, P2600
[13] Microstructure evolution of sub-critical annealed laser deposited Ti-6Al-4V alloy
Lu, Y.
Tang, H. B.
Fang, Y. L.
Liu, D.
Wang, H. M.
[J]. MATERIALS & DESIGN, 2012, 37 : 56 - 63
[14] Microstructure evolution during warm working of Ti-6Al-4V with a colony-α microstructure
Mironov, S.
Murzinova, M.
Zherebtsov, S.
Salishchev, G. A.
Semiatin, S. L.
[J]. ACTA MATERIALIA, 2009, 57 (08) : 2470 - 2481
[15] Peters M., 2005, TITANIUM TITANIUM AL, P6
[16] Microstructure evolution during deformation of a near-α titanium alloy with different initial structures in the two-phase region
Poorganji, Behrang
Yamaguchi, Makoto
Itsumi, Yoshio
Matsumoto, Katsushi
Tanaka, Tomofumi
Asa, Yusuke
Miyamoto, Goro
Furuhara, Tadashi
[J]. SCRIPTA MATERIALIA, 2009, 61 (04) : 419 - 422
[17] EFFECT OF HIGH-TEMPERATURE EXPOSURE ON CREEP RESISTANCE OF TI-6AL-4V ALLOY
ROSEN, A
ROTTEM, A
[J]. MATERIALS SCIENCE AND ENGINEERING, 1976, 22 (01): : 23 - 29
[18] Srinadh KVS, 2004, B MATER SCI, V27, P347
[19] NEW SURFACE MODIFICATION FOR TI-6AL-7NB ALLOY - OXYGEN DIFFUSION HARDENING (ODH)
STREICHER, RM
WEBER, H
SCHON, R
SEMLITSCH, M
[J]. BIOMATERIALS, 1991, 12 (02) : 125 - 129
[20] Wang Huaming, 2004, Journal of Beijing University of Aeronautics and Astronautics, V30, P962

← 1 2 3 →