Control algorithms for PV and Heat Pump system using thermal and electrical storage

In this study a detailed model of a single-family house with an exhaust air heat pump and photovoltaic system is developed in the simulation software TRNSYS. The model is used to evaluate three control algorithms using thermal and electrical storage in terms of final energy, solar fraction, self-consumption and seasonal performance factor. The algorithms are tested and compared with respect to energetic improvement for 1) use of the heat pump plus storage tank for domestic hot water and space heating, 2) use of the electrical storage in batteries and (3) use of both electrical and thermal storage. Results show the highest increase of self-consumption to 50.5%, solar fraction to 40.6% and final energy decrease to 6923 kWh by implementing the third algorithm in a system with 9.36 kW PV capacity and battery storage of 10.8 kWh. 'The use of electrical energy storage has higher positive impact compared to the thermal storage with the settings and component sues used. The combined use of thermal storage and batteries leads to final energy savings that are nearly the same as the combined savings of thermal storage and batteries separately, showing that they are mostly independent of one another for the settings of this study.