Comparison of the Bending Resistance Properties of Carbon Fiber/Foam Sandwich Structural Composites with Different Laying Angles

被引：1

作者：

Zhu, Lvtao ^{[1
,2
,3
]}

Cao, Shengbin ^{[4
]}

Zhang, Xiaofeng ^{[4
]}

Shen, Wei ^{[3
]}

Zhu, Chengyan ^{[1
]}

机构：

[1] Zhejiang Sci Tech Univ, Coll Text Sci & Engn, Int Inst Silk, Hangzhou 310018, Zhejiang, Peoples R China

[2] Key Lab Clean Dyeing & Finishing Technol Zhejiang, Shaoxing, Zhejiang, Peoples R China

[3] Shaoxing Baojing Composite Mat CO LTD, Shaoxing 312000, Zhejiang, Peoples R China

[4] Shanghai Dianji Univ, Sch Mat Sci, Shanghai 201306, Peoples R China

来源：

FIBRES & TEXTILES IN EASTERN EUROPE | 2022年 / 30卷 / 02期

关键词：

sandwich structure; composite; carbon fiber; ply angle; three-point bending; PERFORMANCE; PANELS; SHEAR;

D O I：

10.2478/ftee-2022-0010

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

This research aimed to explore the influence of fiber laying angles on the bending resistance properties of carbon fiber/foam sandwich structural composites. Four kinds of composites with the following laying angles: [0 & DEG;](8), [0 &?degrees/45 degrees/90 degrees/-45 degrees](s), [0 degrees/90 degrees](4) and [45 degrees/-45 degrees](4) were prepared and tested in three-point bending experiments. The results obtained showed that the bending resistance performance was the best when the laying angle was [0 degrees](8), while it was the worst when the laying angle was [45 degrees/-45 degrees](4). Besides, it was found that the tensile performance was the best when the fibers were arranged in the 0 degrees direction when the strength utilisation rate was the highest. In addition, by observing the failure morphologies of the composites, the delamination and foam cracking were found in the four groups of composites. In contrast, the phenomenon of significant fracture was found on composites with a laying angle of [45 degrees/-45 degrees](4) only, indicating it had a poor bending resistance performance.

引用

页码：75 / 81

页数：7

共 30 条

[1]

Arumugam AB, 2021, COMPOS STRUCT, P277

[2] Evaluation of thermal expansion coefficient of carbon fiber reinforced composites using electronic speckle interferometry [J].

Dong, Chengzhi ;

Li, Kai ;

Jiang, Yuxi ;

Arola, Dwayne ;

Zhang, Dongsheng .

OPTICS EXPRESS, 2018, 26 (01) :531-543

[3]

Endo M., 2005, Japan Patent, Patent No. 087992

[4]

Endres GC, 2005, U. S. Patent, Patent No. 083389

[5]

Fatt MSH, 2018, COMPOSITE SANDWICH S

[6] A method using beam search to design the lay-ups of composite laminates with many plies [J].

Fedon, Noemie ;

Weaver, Paul M. ;

Pirrera, Alberto ;

Macquart, Terence .

COMPOSITES PART C: OPEN ACCESS, 2021, 4

[7] Compressive and shear properties of carbon fiber composite square honeycombs with optimized high-modulus hierarchical phases [J].

Feng, Li-Jia ;

Yang, Zhi-Tao ;

Yu, Guo-Cai ;

Chen, Xiao-Jian ;

Wu, Lin-Zhi .

COMPOSITE STRUCTURES, 2018, 201 :845-856

[8]

Hochet N, 2003, European Patent, Patent No. 0989932

[9] 3D printed continuous fibre reinforced composite corrugated structure [J].

Hou, Zhanghao ;

Tian, Xiaoyong ;

Zhang, Junkang ;

Li, Dichen .

COMPOSITE STRUCTURES, 2018, 184 :1005-1010

[10] Investigating the performance of GFRP/wood-based honeycomb sandwich panels for sustainable prefab building construction [J].

Hussain, Muzamil ;

Abbas, Naseem ;

Zahra, Nida ;

Sajjad, Uzair ;

Awan, Muhammad Bilal .

SN APPLIED SCIENCES, 2019, 1 (08)

← 1 2 3 →