Robust design application for optimizing ABS fused filament fabrication process: A case study

被引：10

作者：

Tsiolikas, A. ^{[1
]}

Mikrou, T. ^{[1
]}

Vakouftsi, F. ^{[1
]}

Aslani, K. E. ^{[1
]}

Kechagias, J. ^{[1
]}

机构：

[1] Univ Thessaly, Lab Mfg Proc & Machine Tools, Larisa 41110, Greece

来源：

INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI | 2019年 / 564卷

关键词：

D O I：

10.1088/1757-899X/564/1/012021

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The current paper is a case study of optimizing fused filament fabrication (FFF) process using robust design. FFF process is a low cost 3d printing process that uses ABS (Acrylonitrile-Butadiene-Styrene) filament in order to build progressive layer by layer, physical prototypes. Four (4) parameters having three levels each ones is used (Deposition angle, Layer thickness, Infill ratio, Infill pattern). The quality indicator that used for the optimization process is the dimensional accuracy. It was found that the layer thickness is the most important parameter in the reported experimental area.

引用

页数：6

共 12 条

[1]

[Anonymous], 1995, QUALITY ENG USING RO

[2] The impact of temperature changing on surface roughness of FFF process [J].

Chaidas, D. ;

Kitsakis, K. ;

Kechagias, J. ;

Maropoulos, S. .

20TH INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY CONFERENCE (IMANEE 2016), 2016, 161

[3] Investigating the achievable accuracy of three dimensional printing [J].

Dimitrov, D ;

van Wijck, W ;

Schreve, K ;

de Beer, N .

RAPID PROTOTYPING JOURNAL, 2006, 12 (01) :42-52

[4] Investigation of Dimensional Accuracy and Material Performance in Fused Deposition Modeling [J].

Hyndhavi, Dharipalli ;

Babu, G. Raghu ;

Murthy, Soppari Bhanu .

MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) :23508-23517

[5] Investigation of LOM process quality using design of experiments approach [J].

Kechagias, John .

RAPID PROTOTYPING JOURNAL, 2007, 13 (05) :316-323

[6] A Study of the dimensional accuracy obtained by low cost 3D printing for possible application in medicine [J].

Kitsakis, K. ;

Alabey, P. ;

Kechagias, J. ;

Vaxevanidis, N. .

20TH INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY CONFERENCE (IMANEE 2016), 2016, 161

[7] Tolerance Analysis of 3d-MJM parts according to IT grade [J].

Kitsakis, K. ;

Kechagias, J. ;

Vaxevanidis, N. ;

Giagkopoulos, D. .

20TH INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY CONFERENCE (IMANEE 2016), 2016, 161

[8]

Kitsakis K, 2016, ACAD J MANUF ENG, V14, P4

[9] Progress in additive manufacturing and rapid prototyping [J].

Kruth, JP ;

Leu, MC ;

Nakagawa, T .

CIRP ANNALS 1998 - MANUFACTURING TECHNOLOGY, VOL 47/2/1998: ANNALS OF THE INTERNATIONAL INSTITUTION FOR PRODUCTION ENGINEERING RESEARCH, 1998, :525-540

[10] Taguchi based process optimization for dimension and tolerance control for fused deposition modelling [J].

Mahmood, Shahrain ;

Qureshi, A. J. ;

Talamona, Didier .

ADDITIVE MANUFACTURING, 2018, 21 :183-190

← 1 2 →