Stress Shielding Around Radial Head Prostheses

Purpose Stress shielding is known to occur around rigidly fixed implants. We hypothesized that stress shielding around radial head prostheses is common but nonprogressive. In this study, we present a classification scheme to support our radiographic observations. Methods We reviewed charts and radiographs of 86 cases from 79 patients with radial head implants from both primary and revision surgeries between 1999 and 2009. Exclusion criteria included infection, loosening, or follow-up of less than 12 months. We classified stress shielding as: I, cortical thinning; II, partially (Ha) or circumferentially (IIb) exposed stem; and III, impending mechanical failure. Results Of 26 well-fixed stems, 17 (63%) demonstrated stress shielding: I = 2, II = 15 (IIa = 12, IIb = 3), and III = 0. We saw stress shielding with all stem types: cemented or noncemented; long or short; and straight, curved, or tapered. The only significant difference was that stems implanted into the radial shaft had less stress shielding than stems implanted into the neck or tuberosity (P = .03). The average follow-up was 33 months (range, 13-70 mo). Stress shielding was detectable by an average of II months (range, 1-15 mo). The pattern of bone loss was similar in 16 of 17 cases (94%), starting on the outer periosteal cortex. The 3 cases with circumferential exposure of the stem (stage IIb) averaged 2.6 mm (range, 1-4 mm) of exposed stem. Stress shielding never extended to the bicipital tuberosity, and there were no cases of impending mechanical failure. Conclusions Stress shielding around radial head prostheses is common, regardless of stem design. However, it is typically minor, nonprogressive, and of questionable clinical consequence. (J Hand Surg 2012;37A:2118-2125. Copyright (C) 2012 by the American Society for Surgery of the Hand. All rights reserved.) Type of study/level of evidence Therapeutic IV.