Microstructures and intermediate temperature brittleness of newly developed Ni-Fe based weld metal for ultra-supercritical power plants

被引：16
作者：
Wu, Dong [1 ]
Li, Dianzhong [1 ]
Lu, Shanping [1 ]
机构：
[1] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2017年 / 684卷
关键词：
Ni-Fe based superalloy; Weld metal; Tensile deformation; Grain boundary sliding; Tortuous grain boundary; NICKEL-BASED SUPERALLOY; MECHANICAL-PROPERTIES; INTERGRANULAR CRACKING; ELEVATED-TEMPERATURES; GRAIN-BOUNDARIES; TENSILE BEHAVIOR; DEGREES-C; PART I; DEFORMATION; DUCTILITY;
D O I：
10.1016/j.msea.2016.12.036
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Temperature dependent tensile behavior of Ni-Fe based weld metal by gas tungsten arc welding (GTAW) was evaluated in the range of 350-820 degrees C at a strain rate of 0.035/min. Intergranular fracture and intermediate temperature brittleness (ITB) took place at around 750 degrees C. The microstructure and the fracture surface morphology observation by optical microscopy, scanning and transmission electron microscopy showed that the ITB to a large extent depended on the grain boundary sliding (GBS) and the gamma prime (gamma') precipitation during the elevated temperature tensile deformation. X-ray diffraction (XRD) confirmed that the primary phases formed during the last stage of solidification were mainly TiN nitrides, MC carbides, and Laves phases in the form of Laves/gamma eutectics. Quantitative statistics of the Laves/gamma eutectics and the MX(MC, TiN) phases were processed. These primary phases had a pinning effect on the migration of grain boundaries and accordingly made the grain boundaries tortuous. The tortuous grain boundaries were expected to inhibit the GBS, relieving ITB. Transmission electron microscopy confirmed that fine Laves particles precipitated along the grain boundary in the weld metal with higher Mo content during the deformation process, and these Laves particles were also supposed to be one factor for inhibiting the GBS.
引用
收藏
页码：146 / 157
页数：12
相关论文
共 45 条
  • [21] On the formation of irregular-shaped gamma prime and serrated grain boundaries in a nickel-based superalloy during continuous cooling
    Qiu, C. L.
    Andrews, P.
    [J]. MATERIALS CHARACTERIZATION, 2013, 76 : 28 - 34
  • [22] High temperature behavior of Ni-base weld metal - Part II - Insight into the mechanism for ductility dip cracking
    Ramirez, AJ
    Lippold, JC
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 380 (1-2): : 245 - 258
  • [23] High temperature behavior of Ni-base weld metal - Part I. Ductility and microstructural characterization
    Ramirez, AJ
    Lippold, JC
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 380 (1-2): : 259 - 271
  • [24] Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718
    Rao, G. Appa
    Srinivas, M.
    Sarma, D. S.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 435 : 84 - 99
  • [25] Sanders J.M., 2009, P 34 ANN INT TECHN C
  • [26] Effects of grain-boundary GeO2 particles on intergranular fracture of Cu-GeO2 polycrystals
    Sato, H
    Fujii, T
    Onaka, S
    Kato, M
    [J]. JOURNAL OF MATERIALS SCIENCE, 2003, 38 (08) : 1689 - 1693
  • [27] The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 at 1023 K (750 A°C)
    Shingledecker, J. P.
    Pharr, G. M.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (06): : 1902 - 1910
  • [28] Flow stress anomalies in γ/γ′ two-phase Co-Al-W-base alloys
    Suzuki, Akane
    DeNolf, Garret C.
    Pollock, Tresa M.
    [J]. SCRIPTA MATERIALIA, 2007, 56 (05) : 385 - 388
  • [29] Plastic deformation of the C14 Laves phase (Fe,Ni)2Nb
    Takata, N.
    Armaki, H. Ghassemi
    Terada, Y.
    Takeyama, M.
    Kumar, K. S.
    [J]. SCRIPTA MATERIALIA, 2013, 68 (08) : 615 - 618
  • [30] Tarigan I., 2011, P 12 INT C CREEP FRA
12345