Effect of electromagnetic vibration on the unmixed zone formation in 25Cr-35Ni heat resistant steel/Alloy 800 dissimilar welds

被引:16
作者
Dehmolaei, R. [2 ]
Shamanian, M. [1 ]
Kermanpur, A. [1 ]
机构
[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran
[2] Shahid Chamran Univ, Fac Engn, Dept Mat Sci & Engn, Ahvaz, Iran
关键词
Microstructure; 25Cr-3SNi heat resistant steel; Alloy; 800; 82; Unmixed zone; Vibration;
D O I
10.1016/j.matchar.2008.05.003
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Electromagnetic vibration was applied to molten weld metal during welding of dissimilar welds between 2SCr-35Ni heat resistant steel and Alloy 800 superalloy. It was observed that the unmixed zone in the interface between the 25Cr-35Ni heat resistant steel and (the Alloy 82) weld filler metal was completely eliminated by high-frequency electromagnetic vibration. A complete mixing of the molten filler metal and base metal due to agitation of molten weld metal has caused the unmixed zone to be eliminated. (C) 2008 Elsevier Inc. All rights reserved.
引用
收藏
页码:1814 / 1817
页数:4
相关论文
共 14 条
[1]  
BAESLACK WA, 1979, WELD J, V58, pS168
[2]   DIRECTIONAL SOLIDIFICATION OF PB-SN EUTECTIC WITH VIBRATION [J].
CARAM, R ;
BANAN, M ;
WILCOX, WR .
JOURNAL OF CRYSTAL GROWTH, 1991, 114 (1-2) :249-254
[3]   Effect of ultrasonic vibration on unmixed zone formation [J].
Cui, Y. ;
Xu, C. L. ;
Han, Q. .
SCRIPTA MATERIALIA, 2006, 55 (11) :975-978
[4]   Improving weldability of aged 25Cr-35Ni heat resistant steel/alloy 800 dissimilar welds [J].
Dehmolaei, R. ;
Shamanian, M. ;
Kermanpur, A. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (07) :586-592
[5]  
DEHMOLAEI R, MAT CHARACT IN PRESS, DOI DOI 10.1016/I.MATCHAR.2008.01.013
[6]  
GARNER A, 1982, MATER PERFORMANCE, V21, P9
[7]  
KOU S, 2003, WELDING METALLURGY, P435
[8]  
LANCASTER JF, 1999, METALLURGY WELDING, P363
[9]  
LUKKARI J, 1979, MICROSTR SCI, V7, P333
[10]  
Tuthill AH, 2005, WELD J, V84, P36