Dynamics analysis of a parallel hip joint simulator with four degree of freedoms (3R1T)

For a hip joint simulator with a 3SPS+1PS spatial parallel manipulator as the core module, a formulation based on the Kane equation was derived for the dynamic characteristics of the simulator from the kinematics analysis of the model. The relationships of the velocities and accelerations between the moving platform and active branched-chains were deduced. The velocity and angular velocity components of the moving platform were served as the generalized velocities. And the dynamic model was established by obtaining the generalized active forces and inertial forces. Then the driving forces and powers of the active branched-chains and the constraint reaction forces of the intermediate branched-chain were simulated in the numerical method. The results showed that the active driving forces of the branched-chains reached their respective maximum when the moving platform rotated into 0.13(a similar to) around X-axis, 2(a similar to) around Y-axis, and 18(a similar to) around Z-axis. And the intermediate branched-chain needed to balance the driving and inertia forces, as well as support the moving platform and load the force of hydraulic cylinder. Therefore, the maximum constraint reaction force of the intermediate branched-chain is along the Z-axis. The research works provided a theoretical basis for the design of the active branched-chains driving system and the structural parameters of the intermediate branched-chain, as well as for the control system.