A look underneath the SiO2/4H-SiC interface after N2O thermal treatments

The electrical compensation effect of the nitrogen incorporation at the SiO2/4H-SiC (p-type) interface after thermal treatments in ambient N2O is investigated employing both scanning spreading resistance microscopy (SSRM) and scanning capacitance microscopy (SCM). SSRM measurements on p-type 4H-SiC areas selectively exposed to N2O at 1150 degrees C showed an increased resistance compared to the unexposed ones; this indicates the incorporation of electrically active nitrogen-related donors, which compensate the p-type doping in the SiC surface region. Cross-sectional SCM measurements on SiO2/4H-SiC metal/oxide/semiconductor (MOS) devices highlighted different active carrier concentration profiles in the first 10 nm underneath the insulator-substrate interface depending on the SiO2/4H-SiC roughness. The electrically active incorporated nitrogen produces both a compensation of the acceptors in the substrate and a reduction of the interface state density (D-it). This result can be correlated with the 4H-SiC surface configuration. In particular, lower D-it values were obtained for a SiO2/SiC interface on faceted SiC than on planar SiC. These effects were explained in terms of the different surface configuration in faceted SiC that enables the simultaneous exposition at the interface of atomic planes with different orientations.