Modelling of progressive fibre/matrix debonding in short-fibre reinforced composites up to failure

被引：32
作者：
Notta-Cuvier, D. [1 ]
Lauro, F. [1 ]
Bennani, B. [1 ]
机构：
[1] CNRS, LAMIH, UMR 8201, F-59313 Le Mont Houy 9, Valenciennes, France
来源：
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES | 2015年 / 66卷
关键词：
Short-fibre reinforced polymer; Anisotropy; Fibre/matrix debonding; Damage mechanics; Failure criterion; STRUCTURE-PROPERTY RELATIONSHIPS; PULL-OUT TEST; MECHANICAL-PROPERTIES; INELASTIC COMPOSITES; DAMAGE MECHANISMS; POLYAMIDE 6,6; MATRIX; ORIENTATION; POLYMER; STRENGTH;
D O I：
10.1016/j.ijsolstr.2015.03.034
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Mechanical behaviour of short-fibre reinforced composites (SFRC) can be affected by numerous damage phenomena. This paper focuses on the modelling of fibre/matrix debonding initiated at fibre tips, which is the dominant damage mechanism when a majority of short-fibres are subjected to local tensile loadings. A failure criterion for SFRC is proposed based on a critical amount of voids located in debonded areas. Very accurate mechanical states at break can be predicted for SFRC with complex fibre distribution of orientation, for different kinds of uniaxial and biaxial tensile loadings. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：140 / 150
页数：11
相关论文
共 50 条
  • [21] Modelling of strain rate effects on matrix dominated elastic and failure properties of unidirectional fibre-reinforced polymer-matrix composites
    Raimondo, L.
    Iannucci, L.
    Robinson, P.
    Curtis, P. T.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2012, 72 (07) : 819 - 827
  • [22] Failure behaviour of short-fibre-reinforced PBT composites: Effect of strain rate
    Abdo, Dani
    Gleadall, Andrew
    Silberschmidt, Vadim V.
    ENGINEERING FAILURE ANALYSIS, 2019, 105 : 466 - 476
  • [23] Isolation of hydrodynamic parameters for the fibre length attrition in injection-moulded short-fibre polymer composites
    Ruiz, Maria P.
    Pontes, Antonio J., V
    Luduena, Leandro N.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2021, 40 (13-14) : 505 - 517
  • [24] Modelling fibre-matrix debonding under biaxial loading
    Carraro, P. A.
    Quaresimin, M.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 61 : 33 - 42
  • [25] Modelling the Non-linear fibre and matrix dominated compressive behaviour in unidirectional Fibre-reinforced composites
    Erice, Borja
    Thomson, Daniel
    COMPOSITE STRUCTURES, 2023, 304
  • [26] Kenaf Fibre Reinforced Cementitious Composites
    Abbas, Al-Ghazali Noor
    Aziz, Farah Nora Aznieta Abdul
    Abdan, Khalina
    Nasir, Noor Azline Mohd
    Norizan, Mohd Nurazzi
    FIBERS, 2022, 10 (01)
  • [27] Micromechanical modelling of short fibre composites considering fibre length distributions
    Mentges, N.
    Celik, H.
    Hopmann, C.
    Fagerstrom, M.
    Mirkhalaf, S. M.
    COMPOSITES PART B-ENGINEERING, 2023, 264
  • [28] Effects of fibre content on mechanical properties and fracture behaviour of short carbon fibre reinforced geopolymer matrix composites
    Tiesong Lin
    Dechang Jia
    Meirong Wang
    Peigang He
    Defu Liang
    Bulletin of Materials Science, 2009, 32 : 77 - 81
  • [29] Effects of fibre content on mechanical properties and fracture behaviour of short carbon fibre reinforced geopolymer matrix composites
    Lin, Tiesong
    Jia, Dechang
    Wang, Meirong
    He, Peigang
    Liang, Defu
    BULLETIN OF MATERIALS SCIENCE, 2009, 32 (01) : 77 - 81
  • [30] Mixed experimental-numerical method for quantitative measurement of mode II fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites
    Nikforooz, Mehdi
    Verschatse, Olivier
    Daelemans, Lode
    De Clerck, Karen
    Van Paepegem, Wim
    POLYMER TESTING, 2024, 134
12345