Surface Modification of Austenitic Steel by Various Glow-Discharge Nitriding Methods

被引：10
作者：
Borowski, Tomasz [1 ]
Adamczyk-Cieslak, Boguslawa [1 ]
Brojanowska, Agnieszka [1 ]
Kulikowski, Krzysztof [1 ]
Wierzchon, Tadeusz [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, PL-02507 Warsaw, Poland
来源：
MATERIALS SCIENCE-MEDZIAGOTYRA | 2015年 / 21卷 / 03期
关键词：
glow-discharge nitriding; active screen; plasma and cathodic potential; DC and pulsating current; austenitic steel; CATHODIC CAGE; STAINLESS-STEEL; SCREEN; SAMPLE;
D O I：
10.5755/j01.ms.21.3.7404
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The article presents a characterisation of nitrided layers produced on austenitic X2CrNiMo17-12-2 (AISI 316L) stainless steel in the course of glow-discharge nitriding at cathodic potential, at plasma potential, and at cathodic potential incorporating an active screen. All processes were carried out at 440 degrees C under DC glow-discharge conditions and in 100 kHz frequency pulsed current. The layers were examined in terms of their microstructure, phase and chemical composition, morphology, surface roughness, hardness, wear, and corrosion resistance. Studies have shown a strong influence of the type of nitriding method used and of the electrical conditions on the microstructure and properties of the diffusion layers formed.
引用
收藏
页码：376 / 381
页数：6
相关论文
共 13 条
[1]   Effects of various nitriding parameters on active screen plasma nitriding behavior of a low-alloy steel [J].
Ahangarani, Sh. ;
Mahboubi, F. ;
Sabour, A. R. .
VACUUM, 2006, 80 (09) :1032-1037
[2]   Use of cathodic cage in plasma nitriding [J].
Alves, C., Jr. ;
de Araujo, F. O. ;
Ribeiro, K. J. B. ;
da Costa, J. A. P. ;
Sousa, R. R. M. ;
de Sousa, R. S. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06) :2450-2454
[3]   Modifying the structure of glow discharge nitrided layers produced on high-nickel chromium-less steel with the participation of an athermal martensitic transformation [J].
Borowski, Tomasz ;
Jelenkowski, Jerzy ;
Psoda, Marek ;
Wierzchon, Tadeusz .
SURFACE & COATINGS TECHNOLOGY, 2010, 204 (9-10) :1375-1379
[4]   On the crystallographic structure of S-phase [J].
Christiansen, T ;
Somers, MAJ .
SCRIPTA MATERIALIA, 2004, 50 (01) :35-37
[5]   Nitriding using cathodic cage technique of austenitic stainless steel AISI 316 with addition of CH4 [J].
de Sousa, R. R. M. ;
de Araujo, F. O. ;
Barbosa, J. C. P. ;
Ribeiro, K. J. B. ;
da Costa, J. A. P. ;
Alves, C., Jr. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 487 (1-2) :124-127
[6]   Cathodic cage nitriding of samples with different dimensions [J].
de Sousa, R. R. M. ;
de Araujo, F. O. ;
Ribeiro, K. J. B. ;
Mendes, M. W. D. ;
da Costa, J. A. P. ;
Alves, C., Jr. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 465 (1-2) :223-227
[7]   Nitriding in cathodic cage of stainless steel AISI 316: Influence of sample position [J].
de Sousa, R. R. M. ;
de Araujo, F. O. ;
da Costa, J. A. P. ;
Dumelow, T. ;
de Oliveira, R. S. ;
Alves, C., Jr. .
VACUUM, 2009, 83 (11) :1402-1405
[8]   Characterization of active screen plasma modified polyurethane surfaces [J].
Fu, Xin ;
Jenkins, Mike J. ;
Sun, Guangmin ;
Bertoti, Imre ;
Dong, Hanshan .
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (23) :4799-4807
[9]   Study of active screen plasma processing conditions for carburising and nitriding austenitic stainless steel [J].
Gallo, Santiago Corujeira ;
Dong, Hanshan .
SURFACE & COATINGS TECHNOLOGY, 2009, 203 (24) :3669-3675
[10]   Potential of plasma nitriding of polymer for improved hardness and wear resistance [J].
Li, CX ;
Bell, T .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 168 (02) :219-224
12