Experimental and FEM Analysis of the AA 6082 Processed by Equal Channel Angular Extrusion Up To Two Passages Using Route C

被引：0

作者：

Leon, J. ^{[1
]}

Fuertes, J. P. ^{[1
]}

Luis, C. J. ^{[1
]}

Luri, R. ^{[1
]}

Puertas, I. ^{[1
]}

机构：

[1] Univ Publ Navarra, Mech Energet & Mat Engn Dept, Pamplona 31006, Spain

来源：

4TH MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC 2011) | 2012年 / 1431卷

关键词：

Equal Channel Angular Extrusion (ECAE); Severe Plastic Deformation (SPD); Finite Element Method (FEM); Design of Experiments (DOE); Damage; DEFORMATION;

D O I：

10.1063/1.4707555

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Recent studies have shown that Severe Plastic Deformation (SPD) processes improve the mechanical properties of the parts processed by a reduction in the grain size. Equal Channel Angular Extrusion (ECAE) is one of the most well-known SPD processes. A study on the force and the strain after two ECAE passages is made, along with the damage imparted to AA-6082, by means of experiments and Finite Element Simulations (FEM). The aim of this research is to make a comparative study between experimental results and those obtained by FEM in order to verify the feasibility of these FEM simulations. In addition to this, it is intended to analyze the homogeneity obtained in the strain values after two ECAE passages through route C.

引用

页码：100 / 110

页数：11

共 9 条

[1] [Anonymous], 2010, US GUID
[2] Effect of deformation route on the mechanical properties of CP-Ti deformed by equal channel angular pressing (ECAP)
Chon, S. H.
Liu, S. M.
Kim, T. N.
Park, J. K.
[J]. MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 125 - +
[3] COCKCROFT MG, 1968, J I MET, V96, P33
[4] Developing stable fine-grain microstructures by large strain deformation
Humphreys, FJ
Prangnell, PB
Bowen, JR
Gholinia, A
Harris, C
[J]. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1999, 357 (1756): : 1663 - 1680
[5] Experimental and FEM Analysis of the AA 6082 Processed by Equal Channel Angular Extrusion
Leon, J.
Luis Perez, C. J.
Salcedo, D.
Perez, I.
Fuertes, J. P.
Puertas, I.
Luri, R.
[J]. ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING, 2011, 478 : 46 - 53
[6] Study of ECAE process by using FEM
Luri, R.
Luis, C. J.
[J]. ADVANCES IN MATERIALS PROCESSING TECHNOLOGIE, 2006, 526 : 193 - 198
[7] Evolution of damage in AA-5083 processed by equal channel angular extrusion using different die geometries
Luri, R.
Perez, C. J. Luis
Salcedo, D.
Puertas, I.
Leon, J.
Perez, I.
Fuertes, J. P.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (01) : 48 - 56
[8] MATERIALS PROCESSING BY SIMPLE SHEAR
SEGAL, VM
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 197 (02): : 157 - 164
[9] Bulk nanostructured materials from severe plastic deformation
Valiev, RZ
Islamgaliev, RK
Alexandrov, IV
[J]. PROGRESS IN MATERIALS SCIENCE, 2000, 45 (02) : 103 - 189

← 1 →