Evaluation of creep properties for Sn-Ag-Cu micro solder joint by multi-temperature stress relaxation test

被引:28
作者
Kanda, Yoshihiko [1 ]
Kariya, Yoshiharu [2 ]
机构
[1] Shibaura Inst Technol, Grad Sch, Koto Ku, Tokyo 1358548, Japan
[2] Shibaura Inst Technol, Dept Mat Sci & Engn, Koto Ku, Tokyo 1358548, Japan
关键词
CYCLE FATIGUE LIFE; RELIABILITY; BEHAVIOR; ALLOY; RECRYSTALLIZATION; STRAIN; MODEL; SIZE;
D O I
10.1016/j.microrel.2012.02.006
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The creep properties of a Sn-Ag-Cu micro solder joint with a solder ball with 500 mu m were investigated by a multi-temperature stress relaxation test performed using a specimen at three temperatures (298, 348, and 398 K). The stress exponents in Norton's law were 8 at 398 K, 8.8 at 348 K, and 9 at 298 K. and the activation energies were found to be 39 kJ/mol in the high-stress region and 80 kJ/mol in the low-stress region. The stress exponent in Norton's law for a micro solder joint was lower than that for a large-scale specimen, which resulted in more coarsened intermetallics in the microstructure than in the large-scale specimen. The activation energies for the micro solder joint were almost equal to those for the large-scale specimen in the high- and low-stress regions. These results reflect the microstructure of the micro solder joint, and the creep constitutive equation for the Sn-Ag-Cu joint could be derived by the multi-temperature stress relaxation test proposed in this study. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1435 / 1440
页数:6
相关论文
共 23 条
  • [1] Chip Scale Package (CSP) solder joint reliability and modeling
    Amagai, M
    [J]. MICROELECTRONICS RELIABILITY, 1999, 39 (04) : 463 - 477
  • [2] Influence of Sn grain size and orientation on the thermomechanical response and reliability of Pb-free solder joints
    Bieler, Thomas R.
    Jiang, Hairong
    Lehman, Lawrence P.
    Kirkpatrick, Tim
    Cotts, Eric J.
    Nandagopal, Bala
    [J]. IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2008, 31 (02): : 370 - 381
  • [3] Some mechanical properties of Sn-3.5 Ag eutectic alloy at different temperatures
    El-Bahay, MM
    El Mossalamy, ME
    Mahdy, M
    Bahgat, AA
    [J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2004, 15 (08) : 519 - 526
  • [4] An analytical elasto-creep model of solder joints in leadless chip resistors: Part 2 - Applications in fatigue reliability predictions for SnPb and lead-free solders
    Ghorbani, Hamid R.
    Spelt, Jan K.
    [J]. IEEE TRANSACTIONS ON ADVANCED PACKAGING, 2007, 30 (04): : 695 - 704
  • [5] Creep Behavior of Lead-Free Sn-Ag-Cu plus Ni-Ge Solder Alloys
    Hidaka, N.
    Watanabe, H.
    Yoshiba, M.
    [J]. JOURNAL OF ELECTRONIC MATERIALS, 2009, 38 (05) : 670 - 677
  • [6] Effect of hold time on low cycle fatigue life of micro solder joint
    Kanda, Yoshhiko
    Kariya, Yoshiharu
    Mochizuki, Yusuke
    [J]. MATERIALS TRANSACTIONS, 2008, 49 (07) : 1524 - 1530
  • [7] Influence of Asymmetrical Waveform on Low-Cycle Fatigue Life of Micro Solder Joint
    Kanda, Yoshihiko
    Kariya, Yoshiharu
    [J]. JOURNAL OF ELECTRONIC MATERIALS, 2010, 39 (02) : 238 - 245
  • [8] Kariya V, 2010, P THERM THERM PHEN E
  • [9] Isothermal fatigue properties of Sn-Ag-Cu alloy evaluated by micro size specimen
    Kariya, Y
    Niimi, T
    Suga, T
    Otsuka, M
    [J]. MATERIALS TRANSACTIONS, 2005, 46 (11) : 2309 - 2315
  • [10] Mechanical properties of lead-free solder alloys evaluated by miniature size specimen
    Kariya, Y
    Asai, T
    Suga, T
    [J]. THIRD INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS AND THIRD CONFERENCE OF THE ASIAN-COMMITTEE-ON-EXPERIMENTAL-MECHANICS, PTS 1AND 2, 2005, 5852 : 297 - 301