Research on Calibration and Parameter Compensation of MEMS Inertial Sensors Based on Error Analysis

被引：7

作者：

He Guang-lin ^{[1
]}

Tao Si-qian ^{[1
]}

Shen Qiang ^{[1
]}

Zhou Pian ^{[1
]}

机构：

[1] Beijing Inst Technol, State Key Lab Mechatron Engn & Control, Beijing 100081, Peoples R China

来源：

2012 FIFTH INTERNATIONAL SYMPOSIUM ON COMPUTATIONAL INTELLIGENCE AND DESIGN (ISCID 2012), VOL 1 | 2012年

关键词：

MEMS accelerometer; MEMS gyroscope; error analysis; calibration; parameter compensation;

D O I：

10.1109/ISCID.2012.89

中图分类号：

TP18 [人工智能理论];

学科分类号：

081104 ; 0812 ; 0835 ; 1405 ;

摘要：

Error analysis and compensation are needed for MEMS inertial measurement unit (MEMS IMU) have shortcomings like low measurement precision and high noise, in order to improve the precision of the system. Based on the working principle of MEMS accelerometer and gyroscope, error models of MEMS accelerometer and gyroscope were established at room temperature according to the error source analysis. Then, a method called dynamic flips of six-position was used to calibrate the error parameters of MEMS IMU. The error parameters were calculated by using of a large number of measured data. The simulation results show that after the compensation of the calibrated parameters, the precision of MEMS IMU has been improved 1 to 2 magnitudes.

引用

页码：325 / 329

页数：5

共 50 条

[21] Research on the Motion Error Analysis and Compensation Strategy of the Delta Robot [J].

Shang, Deyong ;

Li, Yu ;

Liu, Yue ;

Cui, Shuanwei .

MATHEMATICS, 2019, 7 (05)

[22] Three-Step Autonomous Calibration Method for Low-Cost MEMS Inertial/Magnetic Sensors [J].

Shi, Ling-Feng ;

Liu, Yu-Yu .

IEEE TRANSACTIONS ON MAGNETICS, 2022, 58 (05)

[23] Novel Temperature Drift Compensation for MEMS Thermal Wind Sensors by Heating Power Calibration Circuits [J].

Qi, Bo ;

Yi, Zhenxiang ;

Qin, Ming ;

Huang, Qing-An .

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2024, 73 :1-9

[24] Inertial Navigation/Mileage Parameter Calibration Method Based on Nonlinear Optimization [J].

Zhao, Zhiqian ;

Zhang, Zhili ;

Zhou, Zhaofa ;

Xu, Zeqian .

ADVANCES IN GUIDANCE, NAVIGATION AND CONTROL, 2023, 845 :6440-6449

[25] Random Error Compensation of MEMS Gyroscope Based on Adaptive Kalman Filter [J].

Lin, Xin ;

Zhang, Xiaoli .

PROCEEDINGS OF THE 32ND 2020 CHINESE CONTROL AND DECISION CONFERENCE (CCDC 2020), 2020, :1206-1210

[26] Research on robustness of MEMS-based wearable sensors [J].

Yuan, Xuebing ;

Dan, Qiang ;

Luo, Zhang ;

Wang, Guoping ;

Liu, Sheng .

2015 16TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, 2015,

[27] Robot error calibration based on distance measurement with parameter selection [J].

Zhang, Tie ;

Dai, Xiaoliang ;

Du, Liang .

Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2014, 40 (05) :585-590

[28] Error Analysis Technique for Indirect Method of Calibration of a Strapdown Inertial Measurement Unit [J].

Vodicheva, L. ;

Parysheva, Yu. .

2019 26TH SAINT PETERSBURG INTERNATIONAL CONFERENCE ON INTEGRATED NAVIGATION SYSTEMS (ICINS), 2019,

[29] Calibration and Error Analysis of Surgical Instrument Based on Stereo Camera [J].

Cao, Li ;

Zhang, Yong ;

Wei, Jun ;

Hu, Yan ;

Liu, Da .

2010 3RD INTERNATIONAL CONFERENCE ON BIOMEDICAL ENGINEERING AND INFORMATICS (BMEI 2010), VOLS 1-7, 2010, :1435-1439

[30] Error parameter identification method of MEMS accelerometers while drilling based on IAO [J].

Yang J. ;

Wang S. ;

Shen L. ;

Yuan X. ;

Cai J. ;

Yin F. .

Zhongguo Guanxing Jishu Xuebao/Journal of Chinese Inertial Technology, 2023, 31 (05) :516-522and530

← 1 2 3 4 5 →