Sulfonated poly(ether ether ketone)-silica membranes doped with phosphotungstic acid. Morphology and proton conductivity

被引:65
作者
Colicchio, Irene [1 ,2 ]
Wen, Fei [3 ]
Keul, Helmut [1 ,2 ]
Simon, Ulrich [3 ]
Moeller, Martin [1 ,2 ]
机构
[1] RWTH Aachen eV, DWI, D-52056 Aachen, Germany
[2] Rhein Westfal TH Aachen, Inst Tech & Macromol Chem, D-52056 Aachen, Germany
[3] Rhein Westfal TH Aachen, Inst Anorgan Chem, D-52056 Aachen, Germany
关键词
Morphology; Proton conductivity; Hybrid membranes; Fuel cells; Phosphotungstic acid; POLYMER ELECTROLYTE MEMBRANES; COMPOSITE MEMBRANES; FUEL-CELLS; NANOCOMPOSITE MEMBRANES; SILICA; HETEROPOLYACIDS; KETONE; NAFION; PERFORMANCE; HYDROGEN;
D O I
10.1016/j.memsci.2008.09.008
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Sulfonated poly(ether ether ketone) (SPEEK)-silica membranes doped with phosphotungstic acid (PWA) are presented. The silica is generated in situ via the water free sol-gel process of polyethoxysiloxane (PEOS), a liquid hyperbranched inorganic polymer of low viscosity. At 100 degrees C and 90% RH the membrane prepared with PEOS (silica content = 20 wt%) shows two times higher conductivity than the pure SPEEK. The addition of small amounts of PWA (2wt% of the total solid content) introduced in the early stage of membrane preparation brings to a further increase in conductivity (more than three times the pure SPEEK). During membrane formation PWA and the sulfonic acid groups of SPEEK act as catalysts in the conversion of PECS in silica. Once the membranes are formed, PWA is incorporated in the silica network and acts as proton conductivity enhancer. The correlation between morphology and proton conductivity allows establishing the optimal doping level and preparation procedure. The morphology is studied by transmission electron microscopy (TEM) while the proton conductivity is measured by impedance spectroscopy (IS). The direct methanol fuel cell performance is also investigated. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:45 / 57
页数:13
相关论文
共 54 条
[1]   Composite membranes for medium-temperature PEM fuel cells [J].
Alberti, G ;
Casciola, M .
ANNUAL REVIEW OF MATERIALS RESEARCH, 2003, 33 :129-154
[2]   Polymeric proton conducting membranes for medium temperature fuel cells (110-160°C) [J].
Alberti, G ;
Casciola, M ;
Massinelli, L ;
Bauer, B .
JOURNAL OF MEMBRANE SCIENCE, 2001, 185 (01) :73-81
[3]   Proton-conducting methacrylate-silica sol-gel membranes containing tungstophosphoric acid [J].
Aparicio, M ;
Mosa, J ;
Etienne, A ;
Durán, A .
JOURNAL OF POWER SOURCES, 2005, 145 (02) :231-236
[4]   The crystal structure of H3PW12O4.29H(2)O [J].
Bradley, AJ ;
Illingworth, JW .
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1936, 157 (A890) :0113-0131
[5]  
Carrette L, 2001, FUEL CELLS, V1, P5, DOI 10.1002/1615-6854(200105)1:1<5::AID-FUCE5>3.0.CO
[6]  
2-G
[7]   Development of hybrid polymer electrolyte membranes based on the semi-interpenetrating network concept [J].
Colicchio, I. ;
Keul, H. ;
Sanders, D. ;
Simon, U. ;
Weirich, T. E. ;
Moeller, M. .
FUEL CELLS, 2006, 6 (3-4) :225-236
[8]   Proton conducting borosiloxane-poly(ether-sulfone) composite electrolyte [J].
Fujinami, T ;
Miyano, D ;
Okamoto, T ;
Ozawa, M ;
Konno, A .
ELECTROCHIMICA ACTA, 2004, 50 (2-3) :627-631
[9]   High performance fuel cell based on phosphotungstic acid as proton conducting electrolyte [J].
Giordano, N ;
Staiti, P ;
Hocevar, S ;
Arico, AS .
ELECTROCHIMICA ACTA, 1996, 41 (03) :397-403
[10]   Organic/inorganic nano-composites for high temperature proton conducting polymer electrolytes [J].
Honma, I ;
Nakajima, H ;
Nishikawa, O ;
Sugimoto, T ;
Nomura, S .
SOLID STATE IONICS, 2003, 162 :237-245