Experimental study on phase change spray cooling

被引：45
|
作者：
Hou, Yu [1 ,2 ]
Liu, Xiufang [2 ,3 ]
Liu, Jionghui [2 ]
Li, Mengjing [2 ]
Pu, Liang [2 ]
机构：
[1] Xi An Jiao Tong Univ, State Key Lab Multiphase Flow Power Engn, Xian 710049, Peoples R China
[2] Xi An Jiao Tong Univ, Sch Energy & Power Engn, Xian 710049, Peoples R China
[3] Sch Mech & Power Engn, Henan Polytech Univ, Jiaozuo 454000, Peoples R China
来源：
EXPERIMENTAL THERMAL AND FLUID SCIENCE | 2013年 / 46卷
基金：
中国博士后科学基金;
关键词：
Spray cooling; Phase change heat transfer; Closed-cycle; Critical heat flux; CRITICAL HEAT-FLUX; SURFACES; WATER; CHF;
D O I：
10.1016/j.expthermflusci.2012.11.023
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Phase change spray cooling is known as an effective method to remove heat from high-power electronic devices due to its high heat transfer efficiency and high critical heat flux (CHF). In this study, a closed-cycle spray cooling system with R22 as the coolant was designed and built, and the system cooling performance including the heat transfer coefficient, cooling surface temperature and CHF was experimentally investigated with nozzle inlet pressure in the range of 0.6-1.0 MPa. The system shows a great capability in removing high heat flux from the cooling surface at a relatively low temperature. As the nozzle inlet pressure increases, the value of CHF first increases and then decreases slightly. The maximum CHF of 276.1 W cm(-2) is achieved at the nozzle inlet pressure of 0.8 MPa and the corresponding cooling surface temperature is 26.8 degrees C. (c) 2012 Elsevier Inc. All rights reserved.
引用
收藏
页码：84 / 88
页数：5
相关论文
共 50 条
  • [21] Effect of the spray cone angle in the spray cooling with R134a
    Martinez-Galvan, Eduardo
    Anton, Raul
    Ramos, Juan Carlos
    Khodabandeh, Rahmatollah
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2013, 50 : 127 - 138
  • [22] Experimental study of the effect of spray inclination on ultrafast cooling of a hot steel plate
    Satya V. Ravikumar
    Jay M. Jha
    Soumya S. Mohapatra
    Apurva Sinha
    Surjya K. Pal
    Sudipto Chakraborty
    Heat and Mass Transfer, 2013, 49 : 1509 - 1522
  • [23] Experimental study on optimal spray parameters of piezoelectric atomizer based spray cooling
    Chen, Hua
    Cheng, Wen-long
    Peng, Yu-hang
    Zhang, Wei-wei
    Jiang, Li-jia
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 103 : 57 - 65
  • [24] Experimental Study on Boiling Heat Transfer of PF-5052 in Spray Cooling
    Kim, Yeung-Chan
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2008, 32 (12) : 938 - 944
  • [25] Numerical simulation on spray cooling with microencapsulated phase change material suspensions
    Zhang, Jiajie
    Wang, Xu
    Zhao, Rui
    Li, Yong
    Ma, Suxia
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2025, 212
  • [26] Phenomenon and Mechanism of Spray Cooling on Nanowire Arrayed and Hybrid Micro/Nanostructured Surfaces
    Chen, Jian-nan
    Xu, Rui-na
    Zhang, Zhen
    Chen, Xue
    Ouyang, Xiao-long
    Wang, Gao-yuan
    Jiang, Pei-xue
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2018, 140 (11):
  • [27] Experimental investigation of heat transfer performance in gas-atomized spray cooling
    Zhao, Yulong
    Gong, Siyuan
    Yang, Qingshuang
    Xuan, Zhiwei
    Li, Wenjie
    Xie, Liyao
    Liu, Liansheng
    Ge, Minghui
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2024, 218
  • [28] Experimental Study on Spray Cooling Performance of Pressure Atomizing Nozzle
    黄晓庆
    张旭
    Transactions of Tianjin University, 2012, (03) : 231 - 235
  • [29] Experimental study on spray cooling performance of pressure atomizing nozzle
    Huang, Xiaoqing
    Zhang, Xu
    Huang, X. (hxq-101@163.com), 2012, Tianjin University (18): : 231 - 235
  • [30] Experimental study of spray cooling on a sintered porous surface with ammonia
    Yang, Q. (yangqiang240@sina.com), 1600, Science Press (40):
12345