Bearing stiffness in wood-to-wood compression joints

被引:8
|
作者
Wanninger, F. [1 ]
Frangi, A. [1 ]
Steiger, R. [2 ]
机构
[1] Swiss Fed Inst Technol, Inst Struct Engn, CH-8093 Zurich, Switzerland
[2] Empa Mat Sci & Technol, Struct Engn Res Lab, CH-8600 Dubendorf, Switzerland
关键词
Post-tensioned timber connection; Connection stiffness; Compression tests; Spring model; Boussinesq's solution;
D O I
10.1016/j.engstruct.2015.07.032
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In post-tensioned timber frames beams and columns are connected by means of a tendon. The tendon presses the beams against the columns which leads to a stress situation where beams are loaded parallel to the grain and columns are loaded perpendicular to the grain. These kind of wood to wood connections are semi-rigid and can therefore resist bending moments. An important factor influencing the behaviour of post-tensioned timber frames is the connection stiffness. Compression tests perpendicular to the grain have been performed in order to estimate the perpendicular to the grain stiffness of a post-tensioned timber connection. The stiffness is represented by the modulus of subgrade reaction, which is the equivalent of a spring constant distributed over an area and which is a parameter frequently used in soil mechanics to calculate deformations and stresses under a foundation. The modulus of subgrade reaction is also needed to calculate the moment-rotation behaviour of post-tensioned timber connections. The compression tests were evaluated using different analytical models based on spring models and the Boussinesq solution in order to estimate the perpendicular to the grain stiffness, i.e. the modulus of subgrade reaction. The test evaluation showed that the modulus of subgrade reaction can be estimated based on the geometrical and mechanical properties of the column solely as suggested by the authors earlier if the Young's modulus is estimated according to EN 338. However, if the calculation is based on higher values from literature or tests, the stress distribution in the column has to be accounted for in order to get accurate results for the modulus of subgrade reaction. The tests also showed that a reinforcement of the column is necessary in order to obtain a satisfactory stiffness in the post-tensioned timber connection. Reinforcing the Norway spruce (picea abies) column with European ash (fraxinus excelsior) increases the modulus of subgrade reaction significantly compared to a column made of spruce entirely. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:631 / 640
页数:10
相关论文
共 50 条
  • [1] Effect of glue line thickness on shear strength of wood-to-wood joints
    Kurt, Ramazan
    WOOD RESEARCH, 2006, 51 (01) : 59 - 66
  • [2] Rubber solution adhesives for wood-to-wood bonding
    John, N
    Joseph, R
    JOURNAL OF APPLIED POLYMER SCIENCE, 1998, 68 (07) : 1185 - 1189
  • [3] Castor oil based polyurethane adhesives for wood-to-wood bonding
    Somani, KP
    Kansara, SS
    Patel, NK
    Rakshit, AK
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2003, 23 (04) : 269 - 275
  • [4] The bearing capacity of agglomerated wood joints
    Kristyna, Vavrusova
    MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING II, 2014, 470 : 1077 - 1080
  • [5] Studies on wood-to-wood bonding adhesives based on natural rubber latex
    John, N
    Joseph, R
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 1997, 11 (02) : 225 - 232
  • [6] EFFECT OF POSTTENSIONING ON ROTATIONAL STIFFNESS OF WOOD JOINTS
    QUENNEVILLE, JHP
    ERKI, MA
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1995, 121 (01): : 134 - 137
  • [7] Influence of Thermal Softening of Wood on the Fundamental Performance of Drift Pin Joints I. Influence on the bearing strength and stiffness of wood
    Tsubata, Shinya
    Sakai, Shunsuke
    Tanaka, Soichi
    Morita, Takeshi
    Nishiya, Takayuki
    Yamanobe, Koji
    Kanayama, Kozo
    MOKUZAI GAKKAISHI, 2022, 68 (01): : 8 - 16
  • [8] Stiffness model for gypsum wallboard-to-wood joints
    Lafontaine, Alex
    Doudak, Ghasan
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 2017, 44 (05) : 338 - 347
  • [9] Preparation and characterization of wood-to-wood bonding adhesive by glycidyl methacrylate grafting natural rubber
    Radabutra, Siriwat
    Khemthong, Pongtanawat
    Saengsuwan, Sayant
    Chanthadand, Chalathorn
    Ponyut, Narumon
    Pijarn, Nuchanaporn
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2022, 114
  • [10] Bending strength and stiffness of two-pin dowel joints constructed of wood and wood composites
    Zhang, JL
    Quin, F
    Tackett, B
    FOREST PRODUCTS JOURNAL, 2001, 51 (02) : 29 - 35