c-axis lithium niobate thin film growth on silicon using solid-source metalorganic chemical vapor deposition

Textured c-axis oriented LiNbO3 films have been grown for waveguiding applications on silicon substrates by the solid-source metalorganic chemical vapor deposition (MOCVD) method using tetramethylheptanedionate sources. Thermally grown SiO2 layers were used as cladding layers to provide optical confinement in the LiNbO3 films. The texture direction could be varied from the [006] to the [012] direction by either increasing the growth temperature and/or decreasing the growth rate. Under optimal growth conditions, 100% [006] texturing could be achieved without the aid of an electrical field or by using a SiNx buffer layer. The crystallinity and surface rms roughness of c-axis oriented films were found to be strongly dependent on the growth rate. Rocking curve full-width half-maximum (FWHM) values of (006) peaks could be decreased to less than 2 degrees by increasing the growth rate. The surface roughness also decreased with growth rate, and rms values as low as 1.5 nm were achieved. On the other hand, too high a growth rate leads to increased roughness due to gas phase nucleation. The optical losses were closely correlated with surface roughness, and the best films had optical losses near 4.5 dB/cm at a wavelength of 632.8 nm.