The Influence of Hydrogen on the Low Cycle Fatigue Behavior of Medium Strength 3.5NiCrMoV Steel Studied Using Notched Specimens

被引：9
作者：
Liu, Qian [1 ]
Atrens, Andrej [1 ]
机构：
[1] Univ Queensland, Mat Engn, St Lucia, Qld 4072, Australia
来源：
ADVANCED ENGINEERING MATERIALS | 2018年 / 20卷 / 02期
基金：
澳大利亚研究理事会;
关键词：
Hydrogen; Low cycle fatigue; Medium strength steel; Scanning electron microscopy; CRACK GROWTH; PLASTICITY; MECHANISM; FRACTURE; FAILURE;
D O I：
10.1002/adem.201700680
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of hydrogen on low cycle fatigue (LCF) of 3.5NiCrMoV steel electrochemically hydrogen charged in the acidified pH 2 0.1M Na2SO4 solution is studied. In the presence of hydrogen, the fatigue life decreases significantly by approximate to 70 to approximate to 80% by: (i) the crack initiation period is decreased; and (ii) the crack growth rate is accelerated. SEM observation indicates that in the presence of hydrogen, the fracture surface shows flat transgranular fracture with vague striations and some intergranular fracture at lower stresses. The fatigue crack growth rate increases with increasing cyclic stress amplitude and with hydrogen fugacity. Once the fatigue crack reaches a critical length, the specimen becomes mechanical unstable and fracture due to ductile overload occurs. The hydrogen contribution to the final fracture process is not significant.
引用
收藏
页数：12
相关论文
共 50 条
  • [21] Influence of microstructure on the low and high cycle fatigue behaviour of a medium carbon microalloyed steel
    Srivastava, V
    Sarma, VS
    Padmanabhan, KA
    ZEITSCHRIFT FUR METALLKUNDE, 2001, 92 (12): : 1312 - 1318
  • [22] THE HIGH CYCLE FATIGUE and FINAL FRACTURE BEHAVIOR OF AN ALLOY STEEL USED IN HYDROGEN PRESSURE VESSELS: INFLUENCE OF NOTCH
    Balogun, Nurudeen
    Srivatsan, T. S.
    Prakash, Amit
    Deeken, B.
    Quick, T.
    FATIGUE OF MATERIALS: ADVANCES AND EMERGENCES IN UNDERSTANDING, 2010, : 169 - 191
  • [23] Low cycle fatigue behavior in a medium-carbon carbide-free bainitic steel
    Kang, J.
    Zhang, F. C.
    Long, X. Y.
    Lv, B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 666 : 88 - 93
  • [24] Low-Cycle Fatigue Behavior of 1100 MPa Grade High-Strength Steel
    Zhou Hongwei
    Bai Fengmei
    Yang Lei
    Chen Yan
    Fang Junfei
    Zhang Liqiang
    Yi Hailong
    He Yizhu
    ACTA METALLURGICA SINICA, 2020, 56 (07) : 937 - 948
  • [25] Effect of hydrogen on very high cycle fatigue behavior of a low-strength Cr-Ni-Mo-V steel containing micro-defects
    Wang, Ning
    Jin, Long
    Zhu, Ming-Liang
    Xuan, Fu-Zhen
    Tu, Shan-Tung
    3RD INTERNATIONAL SYMPOSIUM ON FATIGUE DESIGN AND MATERIAL DEFECTS (FDMD 2017), 2017, 7 : 376 - 382
  • [26] The Low-Cycle Fatigue Behavior of a High-Strength Low-Alloy Steel Subjected to Tempforming
    Dolzhenko, Anastasiia
    Dolzhenko, Pavel
    Dudko, Valeriy
    Kaibyshev, Rustam
    Belyakov, Andrey
    MATERIALS, 2025, 18 (05)
  • [27] The use of the specific heat loss to analyse the low- and high-cycle fatigue behaviour of plain and notched specimens made of a stainless steel
    Meneghetti, Giovanni
    Ricotta, Mauro
    ENGINEERING FRACTURE MECHANICS, 2012, 81 : 2 - 16
  • [28] Short crack behavior during low-cycle fatigue in high-strength bainitic steel
    Marinelli, M. C.
    Alvarez-Armas, I.
    Krupp, U.
    XVIII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM XVIII), 2016, 160 : 183 - 190
  • [29] High cycle fatigue behavior of a low carbon alloy steel: The influence of vacuum carburizing treatment
    Xiao, Na
    Hui, Weijun
    Zhang, Yongjian
    Zhao, Xiaoli
    Chen, Ying
    Dong, Han
    ENGINEERING FAILURE ANALYSIS, 2020, 109
  • [30] Evaluation of the Low-Cycle Fatigue Life of Thin Dual-Phase Steel Sheets for Automobiles Using Miniature Specimens
    Ma, Zhen-Hua
    Zhang, Bin
    Song, Zhu-Man
    Liu, Hua-Sai
    Zhang, Guang-Ping
    STEEL RESEARCH INTERNATIONAL, 2019, 90 (11)
12345