Factors affecting Type IV creep damage in Grade 91 steel welds

被引：53
|
作者：
Parker, Jonathan [1 ]
机构：
[1] EPRI, Charlotte, NC 28262 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2013年 / 578卷
关键词：
Creep; Grade; 91; Steel; Weld; Type IV;
D O I：
10.1016/j.msea.2013.04.045
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Differences in parent material heat treatment and composition apparently have remarkably little influence on the creep life of the heat affected zone (HAZ). Thus, tendency for Type IV cracking in the fine grained or intercritically heat treated regions of the HAZ does not appear to directly depend on the strength of the base steel. However, the current work indicates that the angle of the weld preparation changes the measured cross weld creep life. The results presented suggest that both development of residual stresses and the local properties of the constituent zones in the HAZ influence the tendency for Type IV damage in martensitic steels. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：430 / 437
页数：8
相关论文
共 50 条
  • [21] MODELING THE CREEP DAMAGE OF P91 STEEL USING PERIDYNAMICS
    Kulkarni, Shank S.
    Tabarraei, Alireza
    Wang, Xiaonan
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 9, 2020,
  • [22] Micro-macro combined simulation of the damage progress in low-alloy steel welds subject to type IV creep failure
    Kawashima, F
    Igari, T
    Tokiyoshi, T
    Shiibashi, A
    Tada, N
    JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2004, 47 (03) : 410 - 418
  • [23] Weld repair of Grade 91 piping and components in power generation applications, creep performance of repair welds
    Parker, J. D.
    Siefert, J. A.
    MATERIALS AT HIGH TEMPERATURES, 2016, 33 (01) : 58 - 67
  • [24] Causes of heat-to-heat variation of creep strength in grade 91 steel
    Maruyama, K.
    Nakamura, J.
    Sekido, N.
    Yoshimi, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 696 : 104 - 112
  • [25] The effect of thermal history during fabrication on the mechanical properties of weldments in grade 91 creep resistant steel
    Rothwell, J. S.
    Abson, D. J.
    WELDING IN THE WORLD, 2013, 57 (06) : 913 - 924
  • [26] Influence of Chemical Composition and Heat Treatment on Long-term Creep Strength of Grade 91 Steel
    Kimura, K.
    Sawada, K.
    Kushima, H.
    Toda, Y.
    6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION, 2013, 55 : 2 - 9
  • [27] Prediction of long-term creep behaviour of Grade 91 steel at 873 K in the framework of microstructure-based creep damage mechanics approach
    Christopher, J.
    Choudhary, B. K.
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2019, 28 (06) : 877 - 895
  • [28] Evaluation of Creep-Fatigue Crack Growth for Grade 91 Steel Wide Plate
    Lee, Hyeong-Yeon
    Kim, Jong-Bum
    Lee, Jae-Han
    PRICM 7, PTS 1-3, 2010, 654-656 : 528 - 531
  • [29] Evaluation of long-term creep damage in high Cr ferritic steel welds
    Tabuchi, Masaaki
    Hongo, Hiromichi
    MATERIALS AT HIGH TEMPERATURES, 2011, 28 (03) : 172 - 180
  • [30] Effect of post weld heat treatments on microstructure evolution and type IV cracking behavior of the P91 steel welds joint
    Pandey, Chandan
    Mahapatra, M. M.
    Kumar, Pradeep
    Kumar, S.
    Sirohi, Sachin
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 266 : 140 - 154
12345