Effects of alloying elements on microstructures and mechanical properties of wrought Mg-MM-Sn alloy

被引:54
作者
Lim, Hyun Kyu [1 ]
Kim, Do Hyung [1 ]
Lee, Ju Youn [1 ]
Kim, Won Tae [2 ]
Kim, Do Hyang [1 ]
机构
[1] Yonsei Univ, Ctr Noncrystalline Mat, Dept Met Engn, 134 Sinchon Dong, Seoul 120749, South Korea
[2] Cheongju Univ, Div Appl Sci, Cheongju 360764, Chongbuk, South Korea
关键词
Mg-MM-Sn alloys; Solid-solution softening; Texture evaluation; Formability; ROOM-TEMPERATURE; FORMABILITY; SLIP; BEHAVIOR; PHASE; SHEET;
D O I
10.1016/j.jallcom.2007.12.098
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Microstructural evolution and resulting mechanical properties in Mg-2MM-2Sn-X (X = Al and/or Zn) alloys have been investigated. The specimens were fabricated by hot-rolling. The tensile tests were performed at room temperature and 200 degrees C. The rollability and mechanical properties of specimens are improved with the addition of Al and/or Zn in Mg-MM-Sn alloy. Especially, annealed Mg-2MM-2Sn-1Zn sheet exhibits a good combination of strength and elongation-to-fracture. The result of conical cup test at 200 degrees C with punch speed of 50 mm/min shows that the addition of Al and/or Zn also improves the formability of Mg-MM-Sn alloys. Moreover, alloy containing Zn showed the best formability. The effects of texture and c/a ratio on formability have been discussed. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:308 / 314
页数:7
相关论文
共 50 条
[31]   Effects of Yb/Zr micro-alloying on microstructure, mechanical properties and corrosion resistance of Al-Zn-Mg-Cu alloy [J].
Zhu, Meng-zhen ;
Xu, Yong-xiang ;
Fang, Hua-chan ;
Zhang, Qian-qian ;
Zhang, Zhuo ;
Chen, Kang-hua ;
Yang, Hai-lin ;
Zhu, Kai .
JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2025, 32 (06) :1995-2008
[32]   Effect of calcium content on the microstructural evolution and mechanical properties of wrought Mg-3Al-1Zn alloy [J].
Kim, Jeoung Han ;
Kang, Na Eun ;
Yim, Chang Dong ;
Kim, Byoung Kee .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 525 (1-2) :18-+
[33]   Effect of extrusion speed on microstructure and mechanical properties of Mg-Al-Ca-Sn alloy [J].
Zhang, Maochao ;
Yang, Chao ;
Li, Zhenshuai ;
Bao, Shuai ;
Ye, Peiran ;
Chen, Yungui .
MATERIALS RESEARCH EXPRESS, 2022, 9 (05)
[34]   The effects of alloying elements on microstructures and mechanical properties of tungsten inert gas welded AZ80 magnesium alloys joint [J].
Li, Hui ;
Zhang, Jiansheng ;
Ding, Rongrong .
MATERIALS RESEARCH EXPRESS, 2017, 4 (11)
[35]   Effect of the Cu/Mg Ratio on Mechanical Properties and Corrosion Resistance of Wrought Al-Cu-Mg-Ag Alloy [J].
Alshammari, Talal Talib ;
Ijaz, Muhammad Farzik ;
Alharbi, Hamad F. ;
Soliman, Mahmoud S. .
CRYSTALS, 2023, 13 (06)
[36]   Effect of Ultrasonic Vibration on Tensile Mechanical Properties of Mg-Zn-Y Alloy [J].
Yang, Wenju ;
Xu, Zhichao ;
Xiong, Feng ;
Yang, Haolun ;
Guo, Xuefeng ;
San, Hongshan .
CRYSTALS, 2024, 14 (01)
[37]   Effect of the Content of Alloying Elements on Dynamic Mechanical Properties of TC4 Alloy [J].
Liu Qinghua ;
Hui Songxiao ;
Ye Wenjun ;
Wang Guo ;
Hu Guangshan .
RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (07) :1464-1468
[38]   Influence of Alloying Elements Partitioning Behaviors on the Microstructure and Mechanical Properties in α plus β Titanium Alloy [J].
Huang Sensen ;
Ma Yingjie ;
Zhang Shilin ;
Qi Min ;
Lei Jiafeng ;
Zong Yaping ;
Yang Rui .
ACTA METALLURGICA SINICA, 2019, 55 (06) :741-750
[39]   Effects of Nb addition on the microstructures and mechanical properties of a precipitation hardening Cu-9Ni-6Sn alloy [J].
Gao, Minqiang ;
Chen, Zongning ;
Kang, Huijun ;
Li, Rengeng ;
Wang, Wei ;
Zou, Cunlei ;
Wang, Tongmin .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 715 :340-347
[40]   Microstructures and mechanical properties of extruded and aged Mg-Zn-Mn-Sn-Y alloys [J].
Hu, Guang-shan ;
Zhang, Ding-fei ;
Zhao, Ding-zang ;
Shen, Xia ;
Jiang, Lu-yao ;
Pan, Fu-sheng .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (10) :3070-3075