Normalisation of the amplitude modulation caused by time-varying operating conditions for condition monitoring

被引：26
作者：
Schmidt, Stephan [1 ]
Heyns, P. Stephan [1 ]
机构：
[1] Univ Pretoria, Ctr Asset Integr Management, Dept Mech & Aeronaut Engn, Pretoria, South Africa
来源：
MEASUREMENT | 2020年 / 149卷
关键词：
Amplitude modulation normalisation; Condition monitoring; Gearbox diagnostics; Time-varying operating conditions; ELEMENT BEARING DIAGNOSTICS; ENVELOPE ANALYSIS; PROGNOSTICS; CYCLOSTATIONARITY; GEARBOXES; FAULTS;
D O I：
10.1016/j.measurement.2019.106964
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Performing condition monitoring under time-varying operating conditions is challenging. The time-varying operating conditions result in amplitude and frequency modulation which mask the presence of incipient damage and make it difficult to distinguish between changes in the condition of the machine and changes in its operating conditions. In this work, the benefits of normalising the amplitude modulation caused by the varying operating conditions for condition monitoring are illustrated and a method is proposed to perform this normalisation. It is shown that the proposed method can be used as a preprocessing methodology for deterministic-random separation, it can be used to detect incipient damage and it can be used to reliably estimate the severity of the damage under time-varying operating conditions as well. The proposed method is investigated on numerical gearbox data and experimental gearbox data, where its benefits for condition monitoring under time-varying operating conditions are shown. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数：19
相关论文
共 28 条
  • [1] Order-frequency analysis of machine signals
    Abboud, D.
    Antoni, J.
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, 87 : 229 - 258
  • [2] Envelope analysis of rotating machine vibrations in variable speed conditions: A comprehensive treatment
    Abboud, D.
    Antoni, J.
    Sieg-Zieba, S.
    Eltabach, M.
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, 84 : 200 - 226
  • [3] Deterministic-random separation in nonstationary regime
    Abboud, D.
    Antoni, J.
    Sieg-Zieba, S.
    Eltabach, M.
    [J]. JOURNAL OF SOUND AND VIBRATION, 2016, 362 : 305 - 326
  • [4] Abboud D., 2014, VISHNO, V2014, P2
  • [5] Angle\time cyclostationarity for the analysis of rolling element bearing vibrations
    Abboud, Dany
    Antoni, Jerome
    Eltabach, Mario
    Sieg-Zieba, Sophie
    [J]. MEASUREMENT, 2015, 75 : 29 - 39
  • [6] A new feature for monitoring the condition of gearboxes in non-stationary operating conditions
    Bartelmus, W.
    Zimroz, R.
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2009, 23 (05) : 1528 - 1534
  • [7] Detection of gear deterioration under varying load conditions by using the instantaneous power spectrum
    Baydar, N
    Ball, A
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2000, 14 (06) : 907 - 921
  • [8] Bishop CM, 2006, PATTERN RECOGN, DOI [DOI 10.1117/1.2819119, 10.1117/1.2819119]
  • [9] Application of cepstrum pre-whitening for the diagnosis of bearing faults under variable speed conditions
    Borghesani, P.
    Pennacchi, P.
    Randall, R. B.
    Sawalhi, N.
    Ricci, R.
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2013, 36 (02) : 370 - 384
  • [10] Online shaft encoder geometry compensation for arbitrary shaft speed profiles using Bayesian regression
    Diamond, D. H.
    Heyns, P. S.
    Oberholster, A. J.
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2016, 81 : 402 - 418
123