Infrared brazing Ti-6Al-4V and SP-700 alloys using the Ti-20Zr-20Cu-20Ni braze

被引：43
|
作者：
Chang, C. T.
Wu, Z. Y.
Shine, R. K. [1 ]
Chang, C. S.
机构：
[1] Natl Taiwan Univ, Dept Mat Sci & Engn, Taipei 106, Taiwan
[2] Natl Hualien Ind Vocat Sr High Sch, Dept Mech Engn, Hualien 970, Taiwan
[3] Engineered Mat Solut, Attleboro, MA 02703 USA
来源：
MATERIALS LETTERS | 2007年 / 61卷 / 03期
关键词：
brazing; titanium; metallurgy; metals and alloys; microstructure;
D O I：
10.1016/j.matlet.2006.05.077
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Great efforts have been made in brazing high-strength alpha-beta titanium alloys below their beta-phase transformation temperature in order to obtain optimized mechanical properties. The brazing temperature of the cold roll-bonded Ti-20Zr-20Cu-20Ni foil is roughly 70 degrees C lower than that of Ti-15Cu-15Ni filler metal. Moreover, the detrimental Cu-Ni and Cu-Ni-Zr rich Ti phases can be greatly reduced or eliminated by properly choosing the brazing thermal cycle. This research demonstrates the potential application of Ti-20Zr-20Cu-20Ni foil in brazing titanium alloys. (c) 2006 Elsevier B.V All rights reserved.
引用
收藏
页码：842 / 845
页数：4
相关论文
共 50 条
  • [41] Transient liquid phase (TLP) brazing of Mg-AZ31 and Ti-6Al-4V using Ni and Cu sandwich foils
    Atieh, M.
    Khan, T. I.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2014, 19 (04) : 333 - 342
  • [42] Plastic behavior of the α′ phase in Ti-6Al-4V alloys
    Castioni, Florian
    Cazottes, Sophie
    Rollett, Anthony D.
    Dancette, Sylvain
    MATERIALS LETTERS, 2021, 283
  • [43] Experimental and theoretical study of Ti20Zr20Hf20Nb20X20 (X = V or Cr) refractory high-entropy alloys
    Fazakas, E.
    Zadorozhnyy, V.
    Varga, L. K.
    Inoue, A.
    Louzguine-Luzgin, D. V.
    Tian, Fuyang
    Vitos, L.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 47 : 131 - 138
  • [44] Superplastic deformation of hydrogenated Ti-6Al-4V alloys
    Lu, Junqiang
    Qin, Jining
    Lu, Weijie
    Chen, Yifei
    Zhang, Zhiwei
    Zhang, Di
    Hou, Hongliang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19): : 4875 - 4880
  • [45] Coloured Metallography of Ti-6Al-4V Alloys Using Phtalocyanine Blue
    Garcia, L.
    Dietz, C.
    Gomez de Salazar, J. M.
    Martinez, J. A.
    Criado, A. J.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2016, 53 (06): : 340 - 351
  • [46] Infrared Brazing of Ti50Ni50 Shape Memory Alloy and Inconel 600 Alloy with Two Ag-Cu-Ti Active Braze Alloys
    Shiue, Ren-Kae
    Wu, Shyi-Kaan
    Yang, Sheng-Hao
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (02): : 735 - 744
  • [47] Plastic deformation mechanisms of equiatomic Ni20Ti20Fe20Al20Cu20 high-entropy alloy at high temperatures
    Jiang, Shuyong
    Sun, Dong
    Zhang, Yanqiu
    Wang, Sibing
    Zhao, Chengzhi
    JOURNAL OF MATERIALS SCIENCE, 2017, 52 (06) : 3199 - 3207
  • [48] Optimization of Vacuum Brazing Process Parameters in Ti-6Al-4V Alloy
    Huang, Chou-Dian
    Hwang, Jiun-Ren
    Huang, Jiunn-Yuan
    METALS, 2022, 12 (06)
  • [49] Vacuum brazing of Ti2AlNb and TC4 alloys using Ti-Zr-Cu-Ni and Ti-Zr-Cu-Ni plus Mo filler metals: Microstructural evolution and mechanical properties
    Wang, Ying
    Jiao, Man
    Yang, Zhenwen
    Wang, Dongpo
    Liu, Yongchang
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2018, 18 (02) : 546 - 556
  • [50] Joining of Cf/SiC composite to Ti-6Al-4V with (Ti-Zr-Cu-Ni) plus Ti filler based on in-situ alloying concept
    Fan, Dongyu
    Huang, Jihua
    Zhao, Xiaopeng
    Yang, Jian
    Chen, Shuhai
    Zhao, Xingke
    CERAMICS INTERNATIONAL, 2017, 43 (05) : 4151 - 4158
12345