Infrared brazing Ti-6Al-4V and SP-700 alloys using the Ti-20Zr-20Cu-20Ni braze

被引：43
|
作者：
Chang, C. T.
Wu, Z. Y.
Shine, R. K. [1 ]
Chang, C. S.
机构：
[1] Natl Taiwan Univ, Dept Mat Sci & Engn, Taipei 106, Taiwan
[2] Natl Hualien Ind Vocat Sr High Sch, Dept Mech Engn, Hualien 970, Taiwan
[3] Engineered Mat Solut, Attleboro, MA 02703 USA
来源：
MATERIALS LETTERS | 2007年 / 61卷 / 03期
关键词：
brazing; titanium; metallurgy; metals and alloys; microstructure;
D O I：
10.1016/j.matlet.2006.05.077
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Great efforts have been made in brazing high-strength alpha-beta titanium alloys below their beta-phase transformation temperature in order to obtain optimized mechanical properties. The brazing temperature of the cold roll-bonded Ti-20Zr-20Cu-20Ni foil is roughly 70 degrees C lower than that of Ti-15Cu-15Ni filler metal. Moreover, the detrimental Cu-Ni and Cu-Ni-Zr rich Ti phases can be greatly reduced or eliminated by properly choosing the brazing thermal cycle. This research demonstrates the potential application of Ti-20Zr-20Cu-20Ni foil in brazing titanium alloys. (c) 2006 Elsevier B.V All rights reserved.
引用
收藏
页码：842 / 845
页数：4
相关论文
共 50 条
  • [31] Brazing of Ti-6Al-4V with a copper-based brazing filler metal
    Xu Liu
    Botong Chai
    Jingye Zhang
    Guoqing Zhang
    Wei Wang
    Yuefeng Qi
    Welding in the World, 2021, 65 : 1217 - 1223
  • [32] Brazing of Ti-6Al-4V with a copper-based brazing filler metal
    Liu, Xu
    Chai, Botong
    Zhang, Jingye
    Zhang, Guoqing
    Wang, Wei
    Qi, Yuefeng
    WELDING IN THE WORLD, 2021, 65 (06) : 1217 - 1223
  • [33] Tribological Behaviour of Orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V Alloys
    Cvijovic-Alagic, I.
    Cvijovic, Z.
    Mitrovic, S.
    Rakin, M.
    Veljovic, D.
    Babic, M.
    TRIBOLOGY LETTERS, 2010, 40 (01) : 59 - 70
  • [34] Tribological Behaviour of Orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V Alloys
    I. Cvijović-Alagić
    Z. Cvijović
    S. Mitrović
    M. Rakin
    Đ. Veljović
    M. Babić
    Tribology Letters, 2010, 40 : 59 - 70
  • [35] Powder interlayer bonding of titanium alloys: Ti-6Al-2Sn-4Zr-6Mo and Ti-6Al-4V
    Davies, P.
    Johal, A.
    Davies, H.
    Marchisio, S.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (1-4) : 441 - 452
  • [36] Fracture Toughness of Ti-6Al-4V and Ti-6Al-4V ELI Alloys Fabricated by Electron Beam Melting With Different Orientation and Positions
    Ninerola, Ruben
    Giner, Eugenio
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2025, 48 (05) : 2339 - 2353
  • [37] Sintering Properties of Ti-6Al-4V Alloys Prepared Using Ti/TiH2 Powders
    Oh, J. -M.
    Heo, K. -H.
    Kim, W. -B.
    Choi, G. -S.
    Lim, J. -W.
    MATERIALS TRANSACTIONS, 2013, 54 (01) : 119 - 121
  • [38] Corrosion and passivation of annealed Ti-20Zr-6.5Al-4V alloy
    Yang, Yahui
    Xia, Chaoqun
    Feng, Zhihao
    Jiang, Xiaojun
    Pan, Bo
    Zhang, Xinyu
    Ma, Mingzhen
    Liu, Riping
    CORROSION SCIENCE, 2015, 101 : 56 - 65
  • [39] Material characterization and corrosion behavior of hybrid coating Ti-Al-Si-Cu/Ti-6Al-4V compositeMaterialcharakterisierung und Korrosionsverhalten von hybridbeschichtetem Ti-Al-Si-Cu/Ti-6Al-4V Verbundwerkstoff
    Naidoo, L. C.
    Fatoba, O. S.
    Akinlabi, S. A.
    Mahamood, R. M.
    Shatalov, M. Y.
    Murashkin, E. V.
    Hassan, S.
    Akinlabi, E. T.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2020, 51 (06) : 766 - 773
  • [40] Microstructural Evolution of Brazed Ti-joint Using Ti20Zr20Cu50Ni10 Metallic Glass Ribbon as Filler
    Rao, P. Rama
    Bhatnagar, Anil K.
    Majumdar, Bhaskar
    Muraleedharan, K.
    2ND INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY AND EXHIBITION 2018 (SICE 2018), 2019, 14 : 322 - 329
12345