Infrared brazing Ti-6Al-4V and SP-700 alloys using the Ti-20Zr-20Cu-20Ni braze

被引：43
|
作者：
Chang, C. T.
Wu, Z. Y.
Shine, R. K. [1 ]
Chang, C. S.
机构：
[1] Natl Taiwan Univ, Dept Mat Sci & Engn, Taipei 106, Taiwan
[2] Natl Hualien Ind Vocat Sr High Sch, Dept Mech Engn, Hualien 970, Taiwan
[3] Engineered Mat Solut, Attleboro, MA 02703 USA
来源：
MATERIALS LETTERS | 2007年 / 61卷 / 03期
关键词：
brazing; titanium; metallurgy; metals and alloys; microstructure;
D O I：
10.1016/j.matlet.2006.05.077
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Great efforts have been made in brazing high-strength alpha-beta titanium alloys below their beta-phase transformation temperature in order to obtain optimized mechanical properties. The brazing temperature of the cold roll-bonded Ti-20Zr-20Cu-20Ni foil is roughly 70 degrees C lower than that of Ti-15Cu-15Ni filler metal. Moreover, the detrimental Cu-Ni and Cu-Ni-Zr rich Ti phases can be greatly reduced or eliminated by properly choosing the brazing thermal cycle. This research demonstrates the potential application of Ti-20Zr-20Cu-20Ni foil in brazing titanium alloys. (c) 2006 Elsevier B.V All rights reserved.
引用
收藏
页码：842 / 845
页数：4
相关论文
共 50 条
  • [21] Microstructural analysis of infrared brazed Ti-6Al-4V and Nb using the Ti-15Cu-25Ni foil
    Liaw, D. W.
    Wu, Z. Y.
    Shiue, R. K.
    Chang, C. S.
    ISIJ INTERNATIONAL, 2007, 47 (06) : 869 - 874
  • [22] Tribological behavior of an amorphous Zr20Ti20Cu20Ni20Be20 high-entropy alloy studied using a nanoscratch technique
    Zhao, Y. Y.
    Ye, Y. X.
    Liu, C. Z.
    Feng, R.
    Yao, K. F.
    Nieh, T. G.
    INTERMETALLICS, 2019, 113
  • [23] Brazing of 6061 aluminum alloy/Ti-6Al-4V using Al-Si-Cu-Ge filler metals
    Chang, S. Y.
    Tsao, L. C.
    Lei, Y. H.
    Mao, S. M.
    Huang, C. H.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (01) : 8 - 14
  • [24] Brazing of TC4 Alloy Using Ti-Zr-Ni-Cu-Sn Amorphous Braze Fillers
    Sun, Zhan
    Zhang, Boyu
    Li, Degang
    Zhu, Xinxin
    Chang, Qing
    Zhang, Bo
    Zhang, Lixia
    Long, Weimin
    Zhong, Sujuan
    MATERIALS, 2024, 17 (15)
  • [25] Influence of Zr addition on TIG welding-brazing of Ti-6Al-4V to Al5A06
    Lv, Shixiong
    Cui, Qinglong
    Huang, Yongxian
    Jing, Xiaojun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 568 : 150 - 154
  • [26] Infrared brazing of Ti50Ni50 shape memory alloy using two Ag-Cu-Ti active braze alloys
    Shiue, RH
    Wu, SK
    INTERMETALLICS, 2006, 14 (06) : 630 - 638
  • [27] A Ti–Zr–Cu–Ni–Co–Fe–Al–Sn amorphous filler metal for improving the strength of Ti–6Al–4V alloy brazing joint
    Lulu Sun
    Shujie Pang
    Ying Liu
    Huaping Xiong
    Tao Zhang
    ProgressinNaturalScience:MaterialsInternational, 2017, 27 (06) : 687 - 694
  • [28] Corrosion Behavior of Ti-6Al-4V Alloys
    Nava-Dino, C. G.
    Lopez-Melendez, C.
    Bautista-Margulis, R. G.
    Neri-Flores, M. A.
    Chacon-Nava, J. G.
    de la Torre, S. D.
    Gonzalez-Rodriguez, J. G.
    Martinez-Villafane, A.
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2012, 7 (03): : 2389 - 2402
  • [29] Cu + TiB2 composite filler for brazing Al2O3 and Ti-6Al-4V alloy
    Yang, Minxuan
    Lin, Tiesong
    He, Peng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 512 (01) : 282 - 289
  • [30] Increasing Ti-6Al-4V brazed joint strength equal to the base metal by Ti and Zr amorphous filler alloys
    Ganjeh, E.
    Sarkhosh, H.
    Bajgholi, M. E.
    Khorsand, H.
    Ghaffari, M.
    MATERIALS CHARACTERIZATION, 2012, 71 : 31 - 40
12345