Molecular simulation of an amorphous poly(methyl methacrylate)-poly(tetrafluoroethylene) interface

Molecular dynamics calculations of an amorphous interfacial system of poly(methyl methacrylate) (PMMA) and poly(tetrafluoroethylene) (PTFE) containing about 10,000 interaction sites were performed for 15 ns under constant pressure and constant temperature conditions. The time evolutions of the thickness, density and number of atomic pairs in the interfaces suggested that the interfaces reached their equilibrium states with an interfacial thickness of about 2 nm at 500 K. The molecular motion in the interface and bulk was compared using mean square displacement and torsional autocorrelation function. The separation at a PMMA/PTFE interface was mimicked using non-equilibrium molecular dynamics calculations by applying the potential energy to the MD cell in a direction perpendicular to the interface. Initially, the PTFE layer close to the interface was deformed, and before complete separation, some segments of the PTFE molecules extended from the bulk to the surface of the PMMA layer, which were attached by the intermolecular interaction. The remaining PTFE molecules were entangled in the bulk, which probably prevented the transfer of the PTFE molecules to the surfaces of the PMMA layers. On the other hand, the PMMA layer was only slightly deformed. This separation behavior can be explained by taking into account the intermolecular interaction, the barrier to the conformational changes of the backbones and the entanglement of the PTFE molecules in the bulk. (C) 2000 Elsevier Science Ltd. All rights reserved.