Performance Testing of Loop Heat Pipes with Vapor Chamber in the Evaporator

被引:0
作者
Wang, Chin-Shu [1 ]
Wang, Ying-Chih [1 ]
Lee, Shah-Rong [2 ]
机构
[1] Natl Taipei Univ Technol, Coll Mech & Elect Engn, Taipei, Taiwan
[2] Technol & Sci Inst No Taiwan, Dept Mech Engn, Taipei, Taiwan
来源
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS | 2009年 / 30卷 / 05期
关键词
loop heat pipes (LHP); vapor chamber (VC); evaporator; CAPABILITY;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This work develops a loop heat pipes (LHP) with the advantages of long distance (2050 mm) transport capability and high heat removal capacity (up to NOW). The evaporator of LHP is constructed by vapor chamber (VC) and compensation chamber (CC), which is separated by a 3 mm-thick sinter layer The experiment incorporates five parameters, including as vapor channel layout, orientation, filling ratio (F.R.), wick material and heat capacity. The study results demonstrate that flow resistance is successfully used to design the vapor channel layout. The LHP has better thermal performance in the verticality, and the optimal F.R. is 80%. A wick material with low thermal conductivity prevents the residual heat to leak into the CC, and hence the boiling efficiency and thermal cycle is enhanced. The minimum thermal resistance of LHP with radial channel layout is 0.212 degrees C/W when the heat load is 200W. Therefore, the equilibrium between boiling and condensation established at 200W.
引用
收藏
页码:419 / 424
页数:6
相关论文
共 50 条
  • [31] Development and tests of ammonia Miniature Loop Heat Pipes with cylindrical evaporators
    Maydanik, Yury F.
    Vershinin, Sergey V.
    APPLIED THERMAL ENGINEERING, 2009, 29 (11-12) : 2297 - 2301
  • [32] Literature review: Steady-state modelling of loop heat pipes
    Siedel, Benjamin
    Sartre, Valerie
    Lefevre, Frederic
    APPLIED THERMAL ENGINEERING, 2015, 75 : 709 - 723
  • [33] Theoretical and experimental investigation of the startup characteristics of cryogenic loop heat pipes
    Zhao, Chenyang
    Li, Nanxi
    Li, Junting
    Jiang, Zhenhua
    Wu, Yinong
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2024, 201
  • [34] Comparison of the mixed flow and heat transfer characteristics in the evaporator of a vapor compression heat pump in normal gravity and microgravity
    Ma, Rui
    Ma, Xudong
    Ye, Yilin
    Wu, Yuting
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 172
  • [35] Thermal performance of a two-phase loop thermosyphon with an additively manufactured evaporator
    Elkholy, Ahmed
    Unlusoy, Can
    Kempers, Roger
    APPLIED THERMAL ENGINEERING, 2022, 202
  • [36] Numerical Study on the Effect of Various Working Fluids on the Performance of Loop Heat Pipes Based on Two-Dimensional Simulation
    Shao, Bo
    Lin, Bingyao
    Li, Nanxi
    Liu, Le
    Jiang, Zhenhua
    Dong, Deping
    Wu, Yinong
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2025, 17 (03)
  • [37] Heat transfer performance of an integrated solar-air source heat pump evaporator
    Long, Jibo
    Zhang, Ruichao
    Lu, Jiao
    Xu, Fu
    ENERGY CONVERSION AND MANAGEMENT, 2019, 184 : 626 - 635
  • [38] A comparison of the predicted and experimental heat transfer performance of a finned tube evaporator
    Aganda, AA
    Coney, JER
    Farrant, PE
    Sheppard, CGW
    Wongwuttanasatian, T
    APPLIED THERMAL ENGINEERING, 2000, 20 (06) : 499 - 513
  • [39] Solid and Vapor Chamber Integrated Heat Spreaders: Which to Choose and Why
    Robinson, A. J.
    Colenbrander, J.
    Kempers, R.
    Chen, R.
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2018, 8 (09): : 1581 - 1592
  • [40] Effect of heat transfer area distribution on frosting performance of refrigerator evaporator
    Pegallapati, A. Saikiran
    Ramgopal, Maddali
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 175