Researching of the Stress-Strain State of the Open-Type Press Frame Using of Elastic Compensator of Errors of "Press-Die" System

被引：12

作者：

Balalayeva, Elena ^{[1
]}

Artiukh, Viktor ^{[2
]}

Kukhar, Volodymyr ^{[1
]}

Tuzenko, Olga ^{[1
]}

Glazko, Vladyslav ^{[1
]}

Prysiazhnyi, Andrii ^{[1
]}

Kankhva, Vadim ^{[3
]}

机构：

[1] Priazovskyi State Tech Univ, Univ Ska 7, UA-87500 Mariupol, Ukraine

[2] St Petersburg State Polytech Univ, Polytech Skaya 29, St Petersburg 195251, Russia

[3] Moscow State Univ Civil Engn, Yaroslayskoe Shosse 26, Moscow 129337, Russia

来源：

INTERNATIONAL SCIENTIFIC CONFERENCE ENERGY MANAGEMENT OF MUNICIPAL TRANSPORTATION FACILITIES AND TRANSPORT, EMMFT 2017 | 2018年 / 692卷

关键词：

Elastic compensator; Polyurethane plate; press-die" system; Crank press; Stress-strain state; Finite-element modeling; C-FRAME; RIGIDITY;

D O I：

10.1007/978-3-319-70987-1_24

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The calculating of stress-strain state in the frame of the open crank press using finite element method which allows algorithmizing the process of selecting an elastic compensator of required configuration with specified performance characteristics was designed. Solid models of elastic compensators with various designs are built. Their use is enables to determine the dependences of gap and stress-strain state of the frame in the certain indicative points of the frame from the shape and characteristics of the compensator. A comparison of theoretical and experimental data for the calculation of the stress-strain state of the frame of open crank press with elastic compensators working was made. It was found that the using of compensators reduces the angular deformation in the frame by 10...24%, and the tensile stress - by 6...42%.

引用

页码：220 / 235

页数：16

共 39 条

[1] DEFORMATION OF THE STOKES B2 ROTARY TABLET PRESS - QUANTITATION AND INFLUENCE ON TABLET COMPACTION [J].

ALTAF, SA ;

HOAG, SW .

JOURNAL OF PHARMACEUTICAL SCIENCES, 1995, 84 (03) :337-343

[2]

Aoshima K., 2007, U. S. Patent, Patent No. [7,243,521, 7243521]

[3]

Arango I, 2012, U NORTE, V30, P79

[4] Peculiarities of Mechanical Characteristics of Contemporary Polyurethane Elastomers [J].

Artiukh, Viktor ;

Karlushin, Sergey ;

Sorochan, Elena .

INTERNATIONAL SCIENTIFIC CONFERENCE URBAN CIVIL ENGINEERING AND MUNICIPAL FACILITIES (SPBUCEMF-2015), 2015, 117 :933-939

[5]

Balalayeva E., 2014, HCTL OPEN SCI TECHNO

[6]

Belforte G., 1987, CIRP ANN-MANUF TECHN, V36, P359

[7] Finite Element Analysis on Frame-Type Hydraulic Press [J].

Bi, Da Sen ;

Liu, Dan Dan ;

Chu, Liang ;

Zhang, Jian .

ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2, 2011, 199-200 :1623-1628

[8]

Bordignon A., 2015, US Patent Application, Patent No. [0,008,628, 0008628]

[9]

Brams P, 1999, U. S. Patent, Patent No. [5,858,422, 5858422]

[10]

Bringmann B., 2007, THESIS ETH ZURICH, DOI [10.3929/ethz-a-005424013, DOI 10.3929/ETHZ-A-005424013]

← 1 2 3 4 →