Copper Nanoparticle/Multiwalled Carbon Nanotube Composite Films with High Electrical Conductivity and Fatigue Resistance Fabricated via Flash Light Sintering

被引：69
作者：
Hwang, Hyun-Jun [1 ]
Joo, Sung-Jun [1 ]
Kim, Hak-Sung [1 ,2 ]
机构：
[1] Hanyang Univ, Dept Mech Engn, Seoul 133791, South Korea
[2] Hanyang Univ, Inst Nano Sci & Technol, Seoul 133791, South Korea
来源：
ACS APPLIED MATERIALS & INTERFACES | 2015年 / 7卷 / 45期
基金：
新加坡国家研究基金会;
关键词：
printed electronics; Cu nanoparticle; multiwalled carbon nanotube; flash light; sintering; INTENSE PULSED-LIGHT; THIN-FILMS; PERFORMANCE; PATTERN; ELECTRODES; DUCTILITY;
D O I：
10.1021/acsami.5b08112
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this work, multiwalled carbon nanotubes (MWNTs) were employed to improve the conductivity and fatigue resistance of flash light sintered copper nanoparticle (NP) ink films. The effect of CNT weight fraction on the flash light sintering and the fatigue characteristics of Cu NP/CNT composite films were investigated. The effect of carbon nanotube length was also studied with regard to enhancing the conductivity and fatigue resistance of flash light sintered Cu NP/CNT composite films. The flash light irradiation energy was optimized to obtain high conductivity Cu NP/CNT composite films. Cu NP/CNT composite films fabricated via optimized flash light irradiation had the lowest resistivity (7.86 mu Omega center dot cm), which was only 4.6 times higher than that of bulk Cu films (1.68 mu Omega center dot cm). It was also demonstrated that Cu NP/CNT composite films had better durability and environmental stability than those of Cu NPs only.
引用
收藏
页码：25413 / 25423
页数：11
相关论文
共 39 条
[1]   Nanotubes from carbon [J].
Ajayan, PM .
CHEMICAL REVIEWS, 1999, 99 (07) :1787-1799
[2]   Quantum modeling and proposed, designs of CNT-embedded nanoscale MOSFETs [J].
Akturk, A ;
Pennington, G ;
Goldsman, N .
IEEE TRANSACTIONS ON ELECTRON DEVICES, 2005, 52 (04) :577-584
[3]   Electron transport and velocity oscillations in a carbon nanotube [J].
Akturk, Akin ;
Pennington, Gary ;
Goldsman, Neil ;
Wickenden, Alma .
IEEE TRANSACTIONS ON NANOTECHNOLOGY, 2007, 6 (04) :469-474
[4]   Applicability of Metallic Nanoparticle Inks in RFID Applications [J].
Allen, Mark L. ;
Jaakkola, Kaarle ;
Nummila, Kaj ;
Seppa, Heikki .
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2009, 32 (02) :325-332
[5]   Strong, Light, Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity [J].
Behabtu, Natnael ;
Young, Colin C. ;
Tsentalovich, Dmitri E. ;
Kleinerman, Olga ;
Wang, Xuan ;
Ma, Anson W. K. ;
Bengio, E. Amram ;
ter Waarbeek, Ron F. ;
de Jong, Jorrit J. ;
Hoogerwerf, Ron E. ;
Fairchild, Steven B. ;
Ferguson, John B. ;
Maruyama, Benji ;
Kono, Junichiro ;
Talmon, Yeshayahu ;
Cohen, Yachin ;
Otto, Marcin J. ;
Pasquali, Matteo .
SCIENCE, 2013, 339 (6116) :182-186
[6]   Organic materials for printed electronics [J].
Berggren, M. ;
Nilsson, D. ;
Robinson, N. D. .
NATURE MATERIALS, 2007, 6 (01) :3-5
[7]  
Bidoki SM, 2005, AATCC REV, V5, P11
[8]   Ultrathin Films of Single-Walled Carbon Nanotubes for Electronics and Sensors: A Review of Fundamental and Applied Aspects [J].
Cao, Qing ;
Rogers, John A. .
ADVANCED MATERIALS, 2009, 21 (01) :29-53
[9]   Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells [J].
Cho, Chung-Ki ;
Hwang, Woo-Jin ;
Eun, Kyoungtae ;
Choa, Sung-Hoon ;
Na, Seok-In ;
Kim, Han-Ki .
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 (12) :3269-3275
[10]   Flash light sintered copper precursor/nanoparticle pattern with high electrical conductivity and low porosity for printed [J].
Chung, Wan-Ho ;
Hwang, Hyun-Jun ;
Kim, Hak-Sung .
THIN SOLID FILMS, 2015, 580 :61-70
1234