Synthesis and properties of TiB2/Ti3SiC2 composites

被引：19
|
作者：
Islak, Bilge Yaman [1 ]
Candar, Duygu [1 ]
机构：
[1] Eskisehir Osmangazi Univ, Dept Met & Mat Engn, Fac Engn & Architecture, Meselik Campus, TR-26480 Eskisehir, Turkey
来源：
CERAMICS INTERNATIONAL | 2021年 / 47卷 / 01期
关键词：
In situ synthesis; Ti3SiC2; TiB2; MAX Phases; Spark plasma sintering; PLASMA SINTERED TI3SIC2; MECHANICAL-PROPERTIES; WEAR BEHAVIOR; TEMPERATURE; MICROSTRUCTURE; TITANIUM; POWDERS; TIB2; SHS;
D O I：
10.1016/j.ceramint.2020.09.098
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present study aims to investigate the effect of reinforcing TiB2 particles on the properties of in situ syn-thesized Ti3SiC2. For this purpose, TiB2/Ti3SiC2 composites with 5, 10, and 15 wt%TiB2 addition were synthesized through spark plasma sintering. TiB2/Ti3SiC2 composites were fabricated by this technique for the first time and the effect of TiB2 addition was evaluated comprehensively in terms of sintering behavior and density, phase development, microstructure, mechanical, thermal, and wear properties. Fully densified TiB2/Ti3SiC2 composites without the formation of any impurity phases were obtained at 1300 degrees C, for 15 min, under a pressure of 50 MPa. The mechanical properties and thermal diffusivity of composites were increased with the increasing TiB2 content. The most significant effect of TiB2 addition was obtained in wear properties compared to Ti3SiC2 matrix.
引用
收藏
页码：1439 / 1446
页数：8
相关论文
共 50 条
  • [41] Effect of TiB2 content on microstructure and properties of in situ Ti-TiB composites
    Singh, Harshpreet
    Hayat, Muhammad
    Zhang, Hongzhou
    Das, Raj
    Cao, Peng
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2019, 26 (07) : 915 - 924
  • [42] Study on the Effect of Y on the Morphology and Dispersion of TiB2 Particles in TiB2/Al Composites
    Deng, Yungang
    Xu, Pian
    Lu, Baiping
    Lu, Gang
    Zhang, Lei
    Yan, Yuping
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2025,
  • [43] In-Situ Synthesis and Characterization of TiB2 and Ti-Al-B Composites
    Ramachandran, Muralidharan
    Reddy, Ramana G.
    TMS 2014 SUPPLEMENTAL PROCEEDINGS, 2014, : 57 - 64
  • [44] Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites
    Hu, Liangfa
    Kothalkar, Ankush
    Proust, Gwenaelle
    Karaman, Ibrahim
    Radovic, Miladin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 610 : 635 - 644
  • [45] Elucidating the Effect of TiB2 Volume Percentage on the Mechanical Properties and Corrosion Behavior of Al5083-TiB2 Composites
    Pirlari, Alireza Jafari
    Emamy, Massoud
    Amadeh, Ahmad Ali
    Naghizadeh, Meysam
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) : 6912 - 6920
  • [46] Comparative Study of Composites Reinforced With SiC and TiB2
    James, Johny S.
    Venkatesan, K.
    Kuppan, P.
    Ramanujam, R.
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1012 - 1017
  • [47] Microstructure and Mechanical properties of TiB2/Al Composites
    Chen, Shuai
    Zhao, Yutao
    Jin, Hua
    NEW MATERIALS, APPLICATIONS AND PROCESSES, PTS 1-3, 2012, 399-401 : 2266 - 2270
  • [48] Effect of Ti3SiC2 Amount on Microstructures and Properties of TiAl Matrix Composites
    Qin Zou
    Zhichao Lou
    Yong Guan
    Yanguo Li
    Jiangbo Xu
    Yuanyuan Li
    Lingyu Bu
    Peng Wang
    Yong’an Luo
    Tribology Letters, 2022, 70
  • [49] Synthesis and mechanical properties of TiB2/Ti2AlN composites fabricated by hot pressing sintering
    Lu, Shuai
    Li, Xiaoqiang
    Zhou, Youfu
    Xu, Wentao
    Ling, Junrong
    Pan, Wei
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2018, 126 (11) : 900 - 905
  • [50] Mechanical, thermal physical properties and thermal shock resistance of in situ (TiB2+SiC)/Ti3SiC2 composite
    Zou, Wenjie
    Zhang, Haibin
    Yang, Jian
    Peng, Shuming
    Qiu, Tai
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 741 : 44 - 50
12345