Synthesis and properties of TiB2/Ti3SiC2 composites

被引：19
|
作者：
Islak, Bilge Yaman [1 ]
Candar, Duygu [1 ]
机构：
[1] Eskisehir Osmangazi Univ, Dept Met & Mat Engn, Fac Engn & Architecture, Meselik Campus, TR-26480 Eskisehir, Turkey
来源：
CERAMICS INTERNATIONAL | 2021年 / 47卷 / 01期
关键词：
In situ synthesis; Ti3SiC2; TiB2; MAX Phases; Spark plasma sintering; PLASMA SINTERED TI3SIC2; MECHANICAL-PROPERTIES; WEAR BEHAVIOR; TEMPERATURE; MICROSTRUCTURE; TITANIUM; POWDERS; TIB2; SHS;
D O I：
10.1016/j.ceramint.2020.09.098
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present study aims to investigate the effect of reinforcing TiB2 particles on the properties of in situ syn-thesized Ti3SiC2. For this purpose, TiB2/Ti3SiC2 composites with 5, 10, and 15 wt%TiB2 addition were synthesized through spark plasma sintering. TiB2/Ti3SiC2 composites were fabricated by this technique for the first time and the effect of TiB2 addition was evaluated comprehensively in terms of sintering behavior and density, phase development, microstructure, mechanical, thermal, and wear properties. Fully densified TiB2/Ti3SiC2 composites without the formation of any impurity phases were obtained at 1300 degrees C, for 15 min, under a pressure of 50 MPa. The mechanical properties and thermal diffusivity of composites were increased with the increasing TiB2 content. The most significant effect of TiB2 addition was obtained in wear properties compared to Ti3SiC2 matrix.
引用
收藏
页码：1439 / 1446
页数：8
相关论文
共 50 条
  • [31] Interfacial reactions and mechanical properties of SiC fiber reinforced Ti3SiC2 and Ti3(SiAl)C2 composites
    He, Guangqi
    Xu, Jingjun
    Zhang, Zerong
    Qian, Yuhai
    Zuo, Jun
    Li, Meishuan
    Liu, Changsheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 827
  • [32] Mechanical Properties of TiB2-Al3Ti and TiB2-(Al,Ni)3Ti Composites
    Yoshida, Masashi
    Yumitate, Takafumi
    MATERIALS TRANSACTIONS, 2012, 53 (11) : 1933 - 1937
  • [33] Effects of discrete and simultaneous addition of SiC and Si3N4 on microstructural development of TiB2 ceramics
    Van-Huy Nguyen
    Delbari, Seyed Ali
    Ahmadi, Zohre
    Namini, Abbas Sabahi
    Quyet Van Le
    Shokouhimehr, Mohammadreza
    Asl, Mehdi Shahedi
    Mohammadi, Mohsen
    CERAMICS INTERNATIONAL, 2021, 47 (03) : 3520 - 3528
  • [34] Joining TiB2?TiC?SiC composite to Ta with a Ti/Ni/Ti interlayer: Interfacial microstructure and mechanical properties
    Cai, Xiaoqiang
    Wang, Dongpo
    Wang, Ying
    Yang, Zhenwen
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 64 : 1349 - 1358
  • [35] Reactive sintering and thermodynamics of Ti3SiC2/SiC composites
    Chahhou, Bilal
    Roger, Jerome
    CERAMICS INTERNATIONAL, 2022, 48 (23) : 34635 - 34649
  • [36] Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites
    He, Guangqi
    Guo, Rongxiu
    Li, Meishuan
    Yang, Yang
    Wang, Linshan
    Qian, Yuhai
    Zuo, Jun
    Xu, Jingjun
    Liu, Changsheng
    JOURNAL OF ADVANCED CERAMICS, 2020, 9 (06) : 716 - 725
  • [37] Influence of Synthesis Parameters on Density and Phase Composition of Materials Based on Ti3SiC2
    Bykova, A. D.
    Semenova, V. V.
    Perevislov, S. N.
    Markov, M. A.
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2021, 62 (01) : 89 - 93
  • [38] Sintering of SiC/Ti3SiC2 composites with high SiC contents *
    Chahhou, B.
    Roger, J.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, 43 (16) : 7314 - 7325
  • [39] Characterization of hot pressed SiC whisker reinforced TiB2 based composites
    Farhadi, Kiumars
    Namini, Abbas Sabahi
    Asl, Mehdi Shahedi
    Mohammadzadeh, Ahad
    Kakroudi, Mahdi Ghassemi
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 61 : 84 - 90
  • [40] SPS preparation and mechanical properties of Ti3SiC2/SiC composites reinforced with quantitative SiC
    Du, Chengzhi
    Lei, Bo
    Qi, Yajie
    Zhang, Rui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
12345