Damage analysis on the surface of die casting die of sirder made by aluminium allay of AlSi9Cu3

被引：0
|
作者：
Kosec, B
Kosec, L
Kopac, J
Skrinjar, A
机构：
[1] Univ Ljubljana, NTF Oddelek Mat Met, Ljubljana 1001, Slovenia
[2] Univ Ljubljana, Fak Strojnistvo, Ljubljana 1000, Slovenia
[3] Tomos Alusuisse Doo, Koper 6000, Slovenia
来源：
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2001年 / 47卷 / 09期
关键词：
die casting dies; aluminium alloys; damage analysis;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
On the surface of a casting die surface cracks appeared after less than one thousand casting cycles and caused in imprints on AlSi9Cu3 aluminium alloy, girder castings. The cracks were revealed and identified by the use of penetrants. They were clearly seen by the use of a magnifying glass and some of them even by the unaided eye. They were analysed in detail by the nondestructive metallographic examination by replicas method. (C) 2001 Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：575 / 578
页数：4
相关论文
共 50 条
  • [41] Influence of steel preheat temperature and molten casting alloy AlSi9Cu3(Fe) impact speed on wear of X38CrMoV5-1 steel in high pressure die casting conditions
    Dadic, Zvonimir
    Zivkovic, Drazen
    Catipovic, Niksa
    Marinic-Kragic, Ivo
    WEAR, 2019, 424 : 15 - 22
  • [42] Monitoring strain evolution and distribution during the casting process of AlSi9Cu3 alloy with optical fiber sensors
    Bian, Qiang
    Bauer, Constantin
    Stadler, Andrea
    Buchfellner, Fabian
    Jakobi, Martin
    Volk, Wolfram
    Koch, Alexander W.
    Roths, Johannes
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 935
  • [43] The combined effects of a heterogeneous porosity distribution and stress gradient on the high cycle fatigue behavior of high pressure die cast AlSi9Cu3
    Landron, Thomas
    Morel, Franck
    Saintier, Nicolas
    Le, Viet Duc
    Bellett, Daniel
    Osmond, Pierre
    Forre, Agathe
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 182
  • [44] Experimental and Simulation Tests on the Impact of the Conditions of Casting Solidification from AlSi9Cu3 Alloy on their Structure and Mechanical Properties
    Hajkowski, J.
    Ignaszak, Z.
    ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (01) : 167 - 175
  • [45] Increasing the conductivity of aluminium high-pressure die casting alloy AlSi9Cu3Fe (226D) by Sr modification of eutectic and intermetallic phases
    Feyer, Felix
    Weigand, Michael
    Randelzhofer, Peter
    Koerner, Carolin
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2025, 316
  • [46] Evaluation of Aluminium Alloy (AlSi9Cu3(Fe)) Porosity by Destructive and Non-destructive Method (Computed Tomography)
    Kritikos, Michaela
    Kusa, Martina
    Kusy, Martin
    DIGITIZING PRODUCTION SYSTEMS, ISPR2021, 2022, : 181 - 191
  • [47] Casting of Engine Blocks Made of GK-AlSi17Cu4Mg Alloy as a Low-pressure Die Casting Machine.
    Renninger, Gerhard
    Abendroth, Dietrich
    Bolien, Martin
    Giesserei, 1982, 69 (06): : 145 - 150
  • [48] The Impact of Heat Treatment and Surface Treatment on Thermal Conductivity of Heat Sinks Made of Aluminium Die Casting Alloys
    Rajesh Kumar Manickam
    Dilip Raja Narayana
    JournalofHarbinInstituteofTechnology(NewSeries), 2024, 31 (04) : 34 - 41
  • [49] Analysis of the impact of the change of primary and secondary AlSi9Cu3 alloy ratio in the batch on its performance
    Bolibruchová D.
    Matejka M.
    Kuriš M.
    Manufacturing Technology, 2019, 19 (05): : 734 - 739
  • [50] IDENTIFICATION AND ANALYSIS OF INTERMETALLIC PHASES IN AGE-HARDENED RECYCLED AlSi9Cu3 CAST ALLOY
    Hurtalova, Lenka
    Tillova, Eva
    Chalupova, Maria
    ARCHIVE OF MECHANICAL ENGINEERING, 2012, 59 (04) : 385 - 396
12345