Optical feedback cavity ring-down technique for accurate measurement of ultra-high reflectivity

A novel cavity ring-down (CRD) technique, based on the optical feedback effect of Fabry-Perot diode lasers, is developed for accurate reflectivity measurement of highly reflective cavity mirrors. The strong optical feedback, including the direct reflection from the front cavity mirror of a linear ring-down cavity, is re-injected into the oscillator cavity of the diode laser, and large resonant peaks are observed in the ring-down cavity output signals. The diode laser is switched off by a threshold circuit when the amplitude of a resonant peak exceeds a pre-defined threshold. Exponentially decayed signals recorded immediately after switching off the laser are used to determine the cavity decay time. The ultra-high reflectivity of cavity mirrors is measured to be 99.99606% with a reproducibility of 0.00003%. Compared with the previous phase-shift CRD technique, the signal-to-noise ratio of the cavity output signals is improved with an enhancement factor of over 100.