The Effect of Annealing to the Hardness of High Y2O3-Oxide Dispersion Strengthened (ODS) Ferritic Steels

被引:3
|
作者
Shamsudin, Farha Mizana [1 ]
Radiman, Shahidan [1 ]
Abdullah, Yusof [2 ]
Hamid, Nasri A. [3 ]
机构
[1] Univ Kebangsaan Malaysia, Fac Sci & Technol, Sch Appl Phys, Nucl Sci Programme, Ukm Bangi 43600, Selangor Darul, Malaysia
[2] Agensi Nuklear Malaysia, Ind Technol Div, Mat Technol Grp, Kajang 43000, Selangor Darul, Malaysia
[3] Univ Tenaga Nas, Coll Engn, Ctr Nucl Energy, Putrajaya Campus,Jalan Ikram UNITEN, Kajang 43000, Selangor Darul, Malaysia
来源
SAINS MALAYSIANA | 2018年 / 47卷 / 01期
关键词
Electron microscopy; hardness measurement; mechanical alloying; ODS ferritic steel; XRD measurement; CREEP-PROPERTIES; ALLOYS; TENSILE;
D O I
10.17576/jsm-2018-4701-22
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
The purpose of this study was to investigate the effect of annealing to the hardness of high Y2O3-oxide dispersion strengthened (ODS) ferritic steels. The samples were prepared by mechanical alloying method followed by Cold Isostatic Pressing (CIP). After compaction process, the samples were sintered at 1100 degrees C for 1 h in a tube furnace. The crystal structure and morphology of samples were analyzed by X-ray Diffraction (XRD) measurement and characterized by using field emission scanning electron microscope (FESEM), respectively. The hardness of samples was measured by using a micro-Vickers hardness tester with a load of 200 gf at annealing temperature of 600 degrees C, 800 degrees C and 1000 degrees C, respectively. The Vickers hardness value (HV0,2) versus annealing temperature graph showed that the hardness of all samples started to decrease at temperature of 600 degrees C due to grain growth. The hardness value of all samples (1Y and 5Y) identified at this annealing temperature is 855 HV0,2 and 808 HV0,2, respectively.
引用
收藏
页码:189 / 193
页数:5
相关论文
共 50 条
  • [11] Microstructural Characterization of Oxide Dispersion Strengthened (ODS) Fe-12Cr-0.5Y2O3 Alloy
    Shamsudin, Farha Mizana
    Radiman, Shahidan
    Abdullah, Yusof
    Hamid, Nasri A.
    2016 UKM FST POSTGRADUATE COLLOQUIUM, 2016, 1784
  • [12] Effects of titanium concentration and tungsten addition on the nano-mesoscopic structure of high-Cr oxide dispersion strengthened (ODS) ferritic steels
    Dou, Peng
    Kimura, Akihiko
    Kasada, Ryuta
    Okuda, Takanari
    Inoue, Masaki
    Ukai, Shigeharu
    Ohnuki, Somei
    Fujisawa, Toshiharu
    Abe, Fujio
    JOURNAL OF NUCLEAR MATERIALS, 2013, 442 (1-3) : S95 - S100
  • [13] Strain-induced dissolution of Y-Ti-O nano-oxides in a consolidated ferritic oxide dispersion strengthened (ODS) steel
    Hary, B.
    Loge, R.
    Ribis, J.
    Mathon, M-H.
    Van der Meer, M.
    Baudin, T.
    de Carlan, Y.
    MATERIALIA, 2018, 4 : 444 - 448
  • [14] Nano oxide particles in 18Cr oxide dispersion strengthened (ODS) steels with high yttria contents
    Singh, Ratnakar
    Prakash, Ujjwal
    Kumar, Deepak
    Laha, Kinkar
    MATERIALS CHARACTERIZATION, 2022, 189
  • [15] Epitaxial Fe/Y2O3 interfaces as a model system for oxide-dispersion-strengthened ferritic alloys
    Kaspar, T. C.
    Bowden, M. E.
    Wang, C. M.
    Shutthanandan, V.
    Overman, N. R.
    van Ginhoven, R. M.
    Wirth, B. D.
    Kurtz, R. J.
    JOURNAL OF NUCLEAR MATERIALS, 2015, 457 : 352 - 361
  • [16] Structural change of Y2O3 during mechanical alloying in ODS ferritic stainless steels
    Kimura, Y
    Suejima, S
    Takaki, S
    THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II, 1997, : 1217 - 1222
  • [17] Effects of grain morphology and texture on high temperature deformation in oxide dispersion strengthened ferritic steels
    Okada, H
    Ukai, S
    Inoue, M
    JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 1996, 33 (12) : 936 - 943
  • [18] Effect of Combination Milling on the Microstructure and Mechanical Properties of Ferritic Oxide Dispersion-Strengthened Steels
    Seol, Jae-Bok
    Kim, Kyong Min
    Kim, Jeoung Han
    KOREAN JOURNAL OF METALS AND MATERIALS, 2016, 54 (03): : 171 - 179
  • [19] Effect of Pulsed Fluxes of Deuterium Ions and Deuterium Plasma on Oxide Dispersion Strengthened Ferritic Steels
    V. A. Gribkov
    E. V. Demina
    A. S. Demin
    S. A. Maslyaev
    V. N. Pimenov
    M. D. Prusakova
    V. P. Sirotinkin
    S. V. Rogozhkin
    P. V. Lyamkin
    M. Padukh
    Inorganic Materials: Applied Research, 2021, 12 : 601 - 609
  • [20] Effect of mechanical alloying on the microstructural properties of powder particles for oxide dispersion strengthened ferritic steels
    He, Pei
    Zhou, Zhang-Jian
    Li, Ming
    Xu, Ying-Li
    Ge, Chang-Chun
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2009, 31 (07): : 836 - 841