The Effect of Annealing to the Hardness of High Y2O3-Oxide Dispersion Strengthened (ODS) Ferritic Steels

被引：3
|
作者：
Shamsudin, Farha Mizana [1 ]
Radiman, Shahidan [1 ]
Abdullah, Yusof [2 ]
Hamid, Nasri A. [3 ]
机构：
[1] Univ Kebangsaan Malaysia, Fac Sci & Technol, Sch Appl Phys, Nucl Sci Programme, Ukm Bangi 43600, Selangor Darul, Malaysia
[2] Agensi Nuklear Malaysia, Ind Technol Div, Mat Technol Grp, Kajang 43000, Selangor Darul, Malaysia
[3] Univ Tenaga Nas, Coll Engn, Ctr Nucl Energy, Putrajaya Campus,Jalan Ikram UNITEN, Kajang 43000, Selangor Darul, Malaysia
来源：
SAINS MALAYSIANA | 2018年 / 47卷 / 01期
关键词：
Electron microscopy; hardness measurement; mechanical alloying; ODS ferritic steel; XRD measurement; CREEP-PROPERTIES; ALLOYS; TENSILE;
D O I：
10.17576/jsm-2018-4701-22
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
The purpose of this study was to investigate the effect of annealing to the hardness of high Y2O3-oxide dispersion strengthened (ODS) ferritic steels. The samples were prepared by mechanical alloying method followed by Cold Isostatic Pressing (CIP). After compaction process, the samples were sintered at 1100 degrees C for 1 h in a tube furnace. The crystal structure and morphology of samples were analyzed by X-ray Diffraction (XRD) measurement and characterized by using field emission scanning electron microscope (FESEM), respectively. The hardness of samples was measured by using a micro-Vickers hardness tester with a load of 200 gf at annealing temperature of 600 degrees C, 800 degrees C and 1000 degrees C, respectively. The Vickers hardness value (HV0,2) versus annealing temperature graph showed that the hardness of all samples started to decrease at temperature of 600 degrees C due to grain growth. The hardness value of all samples (1Y and 5Y) identified at this annealing temperature is 855 HV0,2 and 808 HV0,2, respectively.
引用
收藏
页码：189 / 193
页数：5
相关论文
共 50 条
  • [1] Precipitation of Oxide Particles in Oxide Dispersion Strengthened (ODS) Ferritic Steels
    Oono, Naoko
    Ukai, Shigeharu
    MATERIALS TRANSACTIONS, 2018, 59 (10) : 1651 - 1658
  • [2] Cryomilling effect on the mechanical alloying behaviour of ferritic oxide dispersion strengthened powder with Y2O3
    Kim, Jeoung Han
    Lee, Jae Hoon
    Min, Jeon Yeong
    Kim, Seong Woong
    Park, Chan Hee
    Yeom, Jong Taek
    Byun, Thak Sang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 580 : 125 - 130
  • [3] Facile in-situ dispersion of Y2Ti2O7 during mechanical alloying of oxide dispersion strengthened ferritic steels
    Ponraj, B., V
    Kumaran, S.
    MATERIALS LETTERS, 2020, 278
  • [4] Oxidation of ferritic steels dispersion strengthened with TiO2 and Y2O3 oxides in lead melt
    Tsisar, V. P.
    MATERIALS SCIENCE, 2008, 44 (05) : 630 - 637
  • [5] Oxidation of ferritic steels dispersion strengthened with TiO2 and Y2O3 oxides in lead melt
    V. P. Tsisar
    Materials Science, 2008, 44 : 630 - 637
  • [6] Effect of Y2O3 on Spark Plasma Sintering Kinetics of Nanocrystalline 9Cr-1Mo Ferritic Oxide Dispersion-Strengthened Steels
    Karthikeyan Rajan
    Thangaraju Shanmugasundaram
    Vadlamani Subramanya Sarma
    B. S. Murty
    Metallurgical and Materials Transactions A, 2013, 44 : 4037 - 4041
  • [7] Effect of Y2O3 on Spark Plasma Sintering Kinetics of Nanocrystalline 9Cr-1Mo Ferritic Oxide Dispersion-Strengthened Steels
    Rajan, Karthikeyan
    Shanmugasundaram, Thangaraju
    Sarma, Vadlamani Subramanya
    Murty, B. S.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (09): : 4037 - 4041
  • [8] Reducing Anisotropy in High Yttria Ferritic Oxide Dispersion Strengthened Steels by Powder Forging
    D. Kumar
    R. Singh
    U. Prakash
    V. V. Dabhade
    K. Laha
    T. Sakthivel
    Journal of Materials Engineering and Performance, 2022, 31 : 994 - 1002
  • [9] Reducing Anisotropy in High Yttria Ferritic Oxide Dispersion Strengthened Steels by Powder Forging
    Kumar, D.
    Singh, R.
    Prakash, U.
    Dabhade, V. V.
    Laha, K.
    Sakthivel, T.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (02) : 994 - 1002
  • [10] Effect of mechanical alloying parameters on irradiation damage in oxide dispersion strengthened ferritic steels
    Yamashita, S
    Watanabe, S
    Ohnuki, S
    Takahashi, H
    Akasaka, N
    Ukai, S
    JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (PART I) : 647 - 651
12345